10 replies to this topic

[vsthis]

Does anyone know how to spot the differences between a gsr/lancer rear bar and an evo one?

Does the evo one have holes for the rear pods already? etc

Any help appriciated!

[Missile]

Yes the Evo rear bars do have the holes for the rear pods screws.

[runuts]

The EVO bar has mounting points for the pods, and also the mounting points for the bar, within the rear guards are 15mm further back towards the rear of the car.

[vsthis]

Thanks guys.

For anyone interested, the part no for a gsr rear bar is MB912186
Not sure about the evo one but if anyone knows it, could they post it up here?

Cheers!!

[Hypo]

I mounted up a standard CC Lancer rear bar on my EVO II with no issues.

[vsthis]

I've just had a look at the inside middle of my Evo 3 rear bar and its got MB826690 stamped on the inside so i'm guessing thats the part no for anyone interested.

[WindeX]

I believe that they fitted a standard bar to mine and bolted the pods up after some dingbat on a motorbike ran into me.

[GSRSOL]

lol @ dingbat

[runuts]

Evo 3 Rear Bar Mounting Point 15mm difference




GSR Rear Bar Mounting Point

[marbs]

so the CC GSR and the stock CC GLXi lancer rear bars are the same?

but evo 1-3 are different (as shown above in the pics of the mounting points) or is it just Evo 3 rear bars?

[runuts]

I'm not sure about e1/2 bars. Can have a look at a mates. I'd assume the e1 is identical to gsr, the 2 may be the same. However the 2/3 share the same wheelbase, so it prob mounts the same