14 replies to this topic

[What-Lag]

I am looking for a STD cc 94 4 door lancer bonnet and boot lid.

I currently have an evo 3 replica fiberglass bonnet and boot/ironing board wing one atm and would happily do a straight swap if someone wants the bling.
My current boot lid has a crease in it from it being lifted by the wing. the previous owner backed into a wall so the wing need's some fiberglass repairs.

Other wise just want a STD lancer 4 door bonnet and boot.

The boot lid needs to be one with out a wing and no bolt holes.
I am not worried about color.

Mine is grey.
Attached is the pics of what i have atm.
I am located in brisbane.

[rotated7]

I am looking for a STD cc 94 4 door lancer bonnet and boot lid.

I currently have an evo 3 replica fiberglass bonnet and boot/ironing board wing one atm and would happily do a straight swap if someone wants the bling.
My current boot lid has a crease in it from it being lifted by the wing. the previous owner backed into a wall so the wing need's some fiberglass repairs.

Other wise just want a STD lancer 4 door bonnet and boot.

The boot lid needs to be one with out a wing and no bolt holes.
I am not worried about color.

Mine is grey.
Attached is the pics of what i have atm.
I am located in brisbane.

Too bad your in Brissy.. i have a standard bonnet and no hole boot lid that id be happy enough to straight swap with... but im in melb.


If you cant find anyone in brissy to do the swap, let me know.. i may know cheap alternative to freight...

Cheers,
Chris

Edited by rotated7, 29 October 2010 - 12:51 PM.

[BMGTZ]

doesn't this car have a 4g63?......if it does then a std lancer bonnet will hit the top timing belt cover before it closes. you can of course cut the stiffener out of the bonnet that hits the cover and repaint inside the bonnet. or leave the cover off

just thought I would mention this in case you weren't aware of the issue.......If you already know the and have a plan. all good:)

[What-Lag]

doesn't this car have a 4g63?......if it does then a std lancer bonnet will hit the top timing belt cover before it closes. you can of course cut the stiffener out of the bonnet that hits the cover and repaint inside the bonnet. or leave the cover off

just thought I would mention this in case you weren't aware of the issue.......If you already know the and have a plan. all good:)

I wasnt aware the std lancer bonnet wouldnt fit with the 4g... interesting...

[evo-gsr]

As Brian states, with a little chopping off of the bracing under the bonnet it DOES fit.....I had a standard bonnet on mine for a while while my evo bonnet was getting painted. Just chopped the bracing a bit and put two washers under the hinges to lift it a couplle more mm's.....

I have a bonnet here too if you get stuck(NSW).....You can have it for $45 + postage if your interested PM me? I also have a bootlid but has factory holes for wing...BUT- I have the subtle GSR wing for it though.(Just letting you know in case you get stuck) $130 for the lot?....( I have no need for your bonnet or boot)

I suggest e-go.com.au for transport...use the depot to depot option it costs next to nothing.....I got a bench seat from Arundel to Wollongong for $26..................There depot is up the road from my place too!

Edited by jamo-gsr, 29 October 2010 - 10:54 PM.

[Qik-1.8]

pm mate

[What-Lag]

Thanks for the reply's guys.
I have now sorted the bonnet locally from 347-dis
Still after a boot lid.

Jamo - how much for just the boot lid and subtle wing (can you psot a pic as i cant remember what the gsr wing looks like)

Cheers

[htgsr]

You still chasing a boot?
Depending how close the colour is to mine an how beat up it is i may be interested.
Grant should be able to tell you how close in colour they are.

[What-Lag]

You still chasing a boot?
Depending how close the colour is to mine an how beat up it is i may be interested.
Grant should be able to tell you how close in colour they are.

Yer the boot isn't in great condition, so i wont do a trade, i can give to someone with the evo 3 wing if someone wants it. After i find a new std boot.

[evo-gsr]

Thanks for the reply's guys.
I have now sorted the bonnet locally from 347-dis
Still after a boot lid.

Jamo - how much for just the boot lid and subtle wing (can you psot a pic as i cant remember what the gsr wing looks like)

Cheers

Hey mate I would be happy with $50 for the lot?? The boot is black too....

Edited by jamo-gsr, 02 November 2010 - 12:40 AM.

[evo-gsr]

Here ya go.....Check out the picture in post # 13- same wing as that, is what i have...

http://www.4gtuner.c...-delivered-gsr/

[What-Lag]

Here ya go.....Check out the picture in post # 13- same wing as that, is what i have...

http://www.4gtuner.c...-delivered-gsr/

Ok, i might wait to see if a std one with no holes comes up as that wing is still too big lol

[GaN-MaN]

pm sent...

[Mister_Resister]

damn i would of been keen on bonnet swap lol im in brissy too haha

[What-Lag]

damn i would of been keen on bonnet swap lol im in brissy too haha

Bonnet has been swapped sorry, looks alright on the other car.

Still looking for a std boot though.!!!!

Also the evo 3 wing has been given away so its goone too..