Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
#21
Posted 31 August 2011 - 03:52 AM
TMAK
-
- Active Members
-
- 1,301 posts
Formerly known as FRONTN
- LocationHillside, Victoria
Update, Burnzy just sent this to me...
TMAK - JDM Evo 6.5 TME White with stripes - burnzytuned
|MAP shortblock 2.4LR 10.5:1CR|MAP EF3|GSC S2|Ohlins coilovers|Cusco|Endless|Meek|Turbosmart|Spoolin Up|Bosch 2000|Walbro 400|Zeitronix|GM|Kumho|Stock ported intake and exhaust manifolds|
366kws (vdr) @ 2.1bar
Old setup: 280kws (vdr) @ 24psi [email protected]
Previously owned the FRONTN Cordia.
|MAP shortblock 2.4LR 10.5:1CR|MAP EF3|GSC S2|Ohlins coilovers|Cusco|Endless|Meek|Turbosmart|Spoolin Up|Bosch 2000|Walbro 400|Zeitronix|GM|Kumho|Stock ported intake and exhaust manifolds|
366kws (vdr) @ 2.1bar
Old setup: 280kws (vdr) @ 24psi [email protected]
Previously owned the FRONTN Cordia.
Back to top
#22
Posted 31 August 2011 - 06:29 AM
bazeng
-
- Active Members
-
- 9,899 posts
Gday maaaate
- LocationMelbourne
woohoo!
No afr ? Boost?
No afr ? Boost?
AMG | http://www.4gtuner.c...mmc-galant-amg/
GVR4 | http://www.4gtuner.c...shi-galant-vr4/
Springy Motors | Autronic | Motec
#23
Posted 31 August 2011 - 11:11 PM
GSRSOL
-
- Administrators
-
- 8,319 posts
Bird Nerd
- LocationMelbourne
3rd gear too?
Dan | Melbourne | 1994 CD5A / CE9A / E39A bastard child
special thanks to - TRIKFAB | Tropic Motors | Springy Motors
special thanks to - TRIKFAB | Tropic Motors | Springy Motors
#24
Posted 01 September 2011 - 01:58 AM
Dean
-
-
Moderators -
- 6,558 posts
Member
- LocationMelbourne VIC
#25
Posted 01 September 2011 - 02:20 AM
TMAK
-
- Active Members
-
- 1,301 posts
Formerly known as FRONTN
- LocationHillside, Victoria
Baz I can't remember the final AFR's it was about ~12ish and at 22psi only. We'll push for the 300 one day. - It will be another machine on 300 with stock bottom end.woohoo!
No afr ? Boost?
Dan this is a vdr reading and yes very close estimates as long as the loads are input correctly. I actually had a full boot of oils which may have given higher results.3rd gear too?
My last setup showed ~230kw's on the vdr (3rd) and 232.6kw's at the springy dyno day (4th). (Refer to page 1)
Thanks Dean, it was a planned build I wanted to keep the quick spool of a TME turbo but more flow. This is a ball bearing turbo and has been under rated.Bosssss setup, similar spool to stock too I hear on the HKS?
This turbo is awesome!!!
Edited by TMAK, 01 September 2011 - 02:21 AM.
TMAK - JDM Evo 6.5 TME White with stripes - burnzytuned
|MAP shortblock 2.4LR 10.5:1CR|MAP EF3|GSC S2|Ohlins coilovers|Cusco|Endless|Meek|Turbosmart|Spoolin Up|Bosch 2000|Walbro 400|Zeitronix|GM|Kumho|Stock ported intake and exhaust manifolds|
366kws (vdr) @ 2.1bar
Old setup: 280kws (vdr) @ 24psi [email protected]
Previously owned the FRONTN Cordia.
|MAP shortblock 2.4LR 10.5:1CR|MAP EF3|GSC S2|Ohlins coilovers|Cusco|Endless|Meek|Turbosmart|Spoolin Up|Bosch 2000|Walbro 400|Zeitronix|GM|Kumho|Stock ported intake and exhaust manifolds|
366kws (vdr) @ 2.1bar
Old setup: 280kws (vdr) @ 24psi [email protected]
Previously owned the FRONTN Cordia.
#26
Posted 12 September 2011 - 09:13 AM
slowvac
-
- Active Members
-
- 16 posts
Member
- LocationMelbourne
#27
Posted 13 September 2011 - 11:58 PM
TMAK
-
- Active Members
-
- 1,301 posts
Formerly known as FRONTN
- LocationHillside, Victoria
Cheers slowvac, it was intended to remain a street car and this setup works very well. It is very streetable.Good to see that all went well with the setup...
Cheers.
I think I'm done with the engine hardware, perhaps some finer tuning in future with more boost...
TMAK - JDM Evo 6.5 TME White with stripes - burnzytuned
|MAP shortblock 2.4LR 10.5:1CR|MAP EF3|GSC S2|Ohlins coilovers|Cusco|Endless|Meek|Turbosmart|Spoolin Up|Bosch 2000|Walbro 400|Zeitronix|GM|Kumho|Stock ported intake and exhaust manifolds|
366kws (vdr) @ 2.1bar
Old setup: 280kws (vdr) @ 24psi [email protected]
Previously owned the FRONTN Cordia.
|MAP shortblock 2.4LR 10.5:1CR|MAP EF3|GSC S2|Ohlins coilovers|Cusco|Endless|Meek|Turbosmart|Spoolin Up|Bosch 2000|Walbro 400|Zeitronix|GM|Kumho|Stock ported intake and exhaust manifolds|
366kws (vdr) @ 2.1bar
Old setup: 280kws (vdr) @ 24psi [email protected]
Previously owned the FRONTN Cordia.
#28
Posted 20 September 2011 - 03:18 AM
dkGSR
-
- Active Members
-
- 361 posts
Advanced Member
- LocationMelbourne
Tim coming along nice man, looks mint!
Nice figures too
Nice figures too
SOLD: Mitsubishi Lancer GSR 1993 
without 4G for now anyways
without 4G
for now anyways
#29
Posted 20 September 2011 - 03:30 AM
TMAK
-
- Active Members
-
- 1,301 posts
Formerly known as FRONTN
- LocationHillside, Victoria
Thanks heaps dkGSR. Plus this just reminded me to update.
FYI - True story, I bought the turbo when I was drunk and online
So Jimmi (EvolutionTME on EvoOz) called me out yesterday coz he was at Calder and I live around the corner. I ended up joining him...
This may sound like an excuse but for me, my car just kept bogging down and I blame launch control being set too low (5.5krpm). None the less I managed 3 x 12.2's...
Car: Evo 6 TME
Engine: 2L 4G63
Track: Calder Park Raceway
Rims: Standard TME
Tyres: Kumho KU31
Fuel: Caltex E-Flex
60ft- 1.811
ET: [email protected]
Power: ~270 (vdr) @ 1.4bar
Mods: HKS GTII 7460R Turbo, 264/272 cams and usual mods...
BTW my mates said my car was so quiet that they didn't even hear it during my runs as the other cars I was racing were way louder LOL.
I aim to break into the 11's on day and simply not touch the car (mod wise) again. This will remain a street car...
FYI - True story, I bought the turbo when I was drunk and online
Silencing TMAK upon the request of the owner (Tim), bolt on upgrade to current 3" exhaust...
So Jimmi (EvolutionTME on EvoOz) called me out yesterday coz he was at Calder and I live around the corner. I ended up joining him...
This may sound like an excuse but for me, my car just kept bogging down and I blame launch control being set too low (5.5krpm). None the less I managed 3 x 12.2's...
Car: Evo 6 TME
Engine: 2L 4G63
Track: Calder Park Raceway
Rims: Standard TME
Tyres: Kumho KU31
Fuel: Caltex E-Flex
60ft- 1.811
ET: [email protected]
Power: ~270 (vdr) @ 1.4bar
Mods: HKS GTII 7460R Turbo, 264/272 cams and usual mods...
BTW my mates said my car was so quiet that they didn't even hear it during my runs as the other cars I was racing were way louder LOL.
I aim to break into the 11's on day and simply not touch the car (mod wise) again. This will remain a street car...
TMAK - JDM Evo 6.5 TME White with stripes - burnzytuned
|MAP shortblock 2.4LR 10.5:1CR|MAP EF3|GSC S2|Ohlins coilovers|Cusco|Endless|Meek|Turbosmart|Spoolin Up|Bosch 2000|Walbro 400|Zeitronix|GM|Kumho|Stock ported intake and exhaust manifolds|
366kws (vdr) @ 2.1bar
Old setup: 280kws (vdr) @ 24psi [email protected]
Previously owned the FRONTN Cordia.
|MAP shortblock 2.4LR 10.5:1CR|MAP EF3|GSC S2|Ohlins coilovers|Cusco|Endless|Meek|Turbosmart|Spoolin Up|Bosch 2000|Walbro 400|Zeitronix|GM|Kumho|Stock ported intake and exhaust manifolds|
366kws (vdr) @ 2.1bar
Old setup: 280kws (vdr) @ 24psi [email protected]
Previously owned the FRONTN Cordia.
#30
Posted 20 September 2011 - 03:42 AM
bazeng
-
- Active Members
-
- 9,899 posts
Gday maaaate
- LocationMelbourne
Very nice Tim!
What was your previous time?
Jay!
Very nice welding !!!
What was your previous time?
Jay!
Very nice welding !!!
AMG | http://www.4gtuner.c...mmc-galant-amg/
GVR4 | http://www.4gtuner.c...shi-galant-vr4/
Springy Motors | Autronic | Motec
#31
Posted 20 September 2011 - 02:08 PM
TMAK
-
- Active Members
-
- 1,301 posts
Formerly known as FRONTN
- LocationHillside, Victoria
Refer to page 1 baz!Very nice Tim!
What was your previous time?
TMAK - JDM Evo 6.5 TME White with stripes - burnzytuned
|MAP shortblock 2.4LR 10.5:1CR|MAP EF3|GSC S2|Ohlins coilovers|Cusco|Endless|Meek|Turbosmart|Spoolin Up|Bosch 2000|Walbro 400|Zeitronix|GM|Kumho|Stock ported intake and exhaust manifolds|
366kws (vdr) @ 2.1bar
Old setup: 280kws (vdr) @ 24psi [email protected]
Previously owned the FRONTN Cordia.
|MAP shortblock 2.4LR 10.5:1CR|MAP EF3|GSC S2|Ohlins coilovers|Cusco|Endless|Meek|Turbosmart|Spoolin Up|Bosch 2000|Walbro 400|Zeitronix|GM|Kumho|Stock ported intake and exhaust manifolds|
366kws (vdr) @ 2.1bar
Old setup: 280kws (vdr) @ 24psi [email protected]
Previously owned the FRONTN Cordia.
#32
Posted 21 September 2011 - 01:19 PM
JayRome
-
- Active Members
-
- 4,958 posts
Blurring the line between 1st to 3rd Gen engines....
- LocationMelbourne
Very nice Tim!
What was your previous time?
Jay!
Very nice welding !!!
thanks bro..
Chosen Weapons:
WideBody Galant GSR 4g63 N/A+T Hybrid 1st/3rd gen +AWD
Audi A3 slow POS
#33
Posted 27 October 2011 - 11:23 AM
TMAK
-
- Active Members
-
- 1,301 posts
Formerly known as FRONTN
- LocationHillside, Victoria
I was told that there's another TME floating around that looks like mine - Stock looking with stripes.
So I just had to change that...
I've just bought new shoes:
- WORK CR KAI 18 x 9.5 +20 in Gun Metal Grey
- Kumho KU31 in 235/40/18
Recent work done included:
- I lowered the fronts by 10mm and cambered -2.5
- Lowered the rears by 5mm then raised 5mm again
- I shaved the rear arch with an angle grinder and smoothed it out with the dremmel
- Also tried cleaning the coilies, brembo's etc...
- Wheel alignment
Here's some pics and excuse the car not being clean and the mess in the garage Lol.
Sorry bout the sizing - dunno what happened.
So I just had to change that...
I've just bought new shoes:
- WORK CR KAI 18 x 9.5 +20 in Gun Metal Grey
- Kumho KU31 in 235/40/18
Recent work done included:
- I lowered the fronts by 10mm and cambered -2.5
- Lowered the rears by 5mm then raised 5mm again
- I shaved the rear arch with an angle grinder and smoothed it out with the dremmel
- Also tried cleaning the coilies, brembo's etc...
- Wheel alignment
Here's some pics and excuse the car not being clean and the mess in the garage Lol.
Sorry bout the sizing - dunno what happened.
TMAK - JDM Evo 6.5 TME White with stripes - burnzytuned
|MAP shortblock 2.4LR 10.5:1CR|MAP EF3|GSC S2|Ohlins coilovers|Cusco|Endless|Meek|Turbosmart|Spoolin Up|Bosch 2000|Walbro 400|Zeitronix|GM|Kumho|Stock ported intake and exhaust manifolds|
366kws (vdr) @ 2.1bar
Old setup: 280kws (vdr) @ 24psi [email protected]
Previously owned the FRONTN Cordia.
|MAP shortblock 2.4LR 10.5:1CR|MAP EF3|GSC S2|Ohlins coilovers|Cusco|Endless|Meek|Turbosmart|Spoolin Up|Bosch 2000|Walbro 400|Zeitronix|GM|Kumho|Stock ported intake and exhaust manifolds|
366kws (vdr) @ 2.1bar
Old setup: 280kws (vdr) @ 24psi [email protected]
Previously owned the FRONTN Cordia.
#34
Posted 27 October 2011 - 11:24 AM
TMAK
-
- Active Members
-
- 1,301 posts
Formerly known as FRONTN
- LocationHillside, Victoria
TMAK - JDM Evo 6.5 TME White with stripes - burnzytuned
|MAP shortblock 2.4LR 10.5:1CR|MAP EF3|GSC S2|Ohlins coilovers|Cusco|Endless|Meek|Turbosmart|Spoolin Up|Bosch 2000|Walbro 400|Zeitronix|GM|Kumho|Stock ported intake and exhaust manifolds|
366kws (vdr) @ 2.1bar
Old setup: 280kws (vdr) @ 24psi [email protected]
Previously owned the FRONTN Cordia.
|MAP shortblock 2.4LR 10.5:1CR|MAP EF3|GSC S2|Ohlins coilovers|Cusco|Endless|Meek|Turbosmart|Spoolin Up|Bosch 2000|Walbro 400|Zeitronix|GM|Kumho|Stock ported intake and exhaust manifolds|
366kws (vdr) @ 2.1bar
Old setup: 280kws (vdr) @ 24psi [email protected]
Previously owned the FRONTN Cordia.
#35
Posted 27 October 2011 - 11:31 AM
EV0300
-
- Active Members
-
- 1,502 posts
Advanced Member
- LocationVictoria, Geelong
#36
Posted 27 October 2011 - 12:13 PM
Qik-1.8
-
- Active Members
-
- 1,560 posts
Formally known as 347-dis
- LocationNorth Brisbane
#37
Posted 27 October 2011 - 05:49 PM
milkandoj
-
- Active Members
-
- 1,688 posts
Advanced Member
- LocationPerth
The rims look AWESOME!
99% home built for a life time warranty. Engine now needing repair under 'warranty'
#38
Posted 28 October 2011 - 04:38 AM
brettu26
-
- Active Members
-
- 798 posts
NZJDM'er
- LocationLyndhurst, VIC
#39
Posted 31 October 2011 - 12:54 AM
BYBY5L
-
- Active Members
-
- 2,047 posts
Member
- LocationMelbourne
mean as bro, ya makin some dam good progress ther,
an i know ya dilemma with crankin her up to a hard tune, but hey, ill do it if you do, lol
an i know ya dilemma with crankin her up to a hard tune, but hey, ill do it if you do, lol
#40
Posted 03 November 2011 - 02:36 AM
jase
-
- Active Members
-
- 1,337,374 posts
Ye Olde Member
- LocationAdelaide, SA
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users
