hi everybody..
does anybody know how to check if the ECU is dead?
think i fried mine....... it doesnt give any OBD codes....
service manual says NO CODE = ECU DEAD
but all the other electrical stuff is working... lights, fuel pump, Gauges, etc .......... just cant start... check engine light is on, so checked for OBD codes.. none comes up
any ideas?
cheers
DAsith
Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
#1
Posted 06 December 2010 - 09:33 AM
Dasithkg
-
- Active Members
-
- 223 posts
Advanced Member
- LocationMelbourne Australia
Back to top
#2
Posted 06 December 2010 - 12:17 PM
Gianni
-
- Active Members
-
- 2,433 posts
Advanced Member
- LocationMelbourne
Stock?
Mine wouldn't start once Coz simply a wire had shorted to power the ecu. Check over all ur power wires to ecu and see if anything has shorted. If not im outa idea Coz that all I've experienced with them
Mine wouldn't start once Coz simply a wire had shorted to power the ecu. Check over all ur power wires to ecu and see if anything has shorted. If not im outa idea Coz that all I've experienced with them
Gianni
#3
Posted 06 December 2010 - 01:18 PM
BMGTZ
-
- Donating Members
-
- 4,554 posts
Grumpy old man from the school of hard knocks
- Locationsouthside of perth WA
when my daughters car had the ecu die. it would crank and had all the lights but just didnt start.
she drove into a friends drive way stayed about five minutes and went to leave....dead ecu
BUT I can say there is a difference in what your symptoms are.......her fuel pump didn't work as there was no output from the ecu to the main relay
she drove into a friends drive way stayed about five minutes and went to leave....dead ecu
BUT I can say there is a difference in what your symptoms are.......her fuel pump didn't work as there was no output from the ecu to the main relay
BRIAN
Black evo 1 full road rego and done properly/legally
I have heaps of parts...but never the one I need.
#4
Posted 06 December 2010 - 07:20 PM
jerome266
-
- Active Members
-
- 654 posts
Advanced Member
- LocationBribie
Ive had the ecu die on me twice now
Take it out from under the kick panel
open it up take the case off...see if it smells or looks burnt
could be the caps
Take it out from under the kick panel
open it up take the case off...see if it smells or looks burnt
could be the caps
FULLY MOLESTED RICED OUT JSPEC VR4
#5
Posted 06 December 2010 - 09:08 PM
Dasithkg
-
- Active Members
-
- 223 posts
Advanced Member
- LocationMelbourne Australia
Thanx guys. Yez Its stock. Wil check the wiring and ecu both! And il see further and let u guys know!
#6
Posted 08 December 2010 - 03:04 AM
Big M
-
- Active Members
-
- 24 posts
Member
- LocationSydney
A quick way to check the ECU is using the boost pressure organe light bar on the dash. With the ignition on the light should come on to half way, if there is no lights the ECU is dead namely the caps are gone.
- Dasithkg likes this
#8
Posted 08 December 2010 - 05:32 AM
blackvr
-
- Active Members
-
- 574 posts
Advanced Member
- LocationAdelaide
An average sense of smell works pretty well... Stick the sniffer near the ECU and if there is an electrical burnt/acrid smell... theres a pretty good chance the ECU has suffered the dreaded leaking capacitors. Inspecting the ECU board will confirm this.
- Dasithkg likes this
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
