20 replies to this topic

[antos]

hi guys, after a set of 17x7, 4x114.3 wrc enkei tarmacs.
i did see the old post that there were a set but have only recently been back on this forum and saw they were sold
whoever brought them if you want to part with them please let me know.
i will try get back on here but you can reach me on 0437831661
thanks all
anthony

[EV0300]

hi guys, after a set of 17x7, 4x114.3 wrc enkei tarmacs.
i did see the old post that there were a set but have only recently been back on this forum and saw they were sold
whoever brought them if you want to part with them please let me know.
i will try get back on here but you can reach me on 0437831661
thanks all
anthony

i duno how much you want to spend but there is a set on ebay at 3k

http://www.ebay.com....=item3cba679eda

[ENGINR]

$3k!?

WTF...

[EV0300]

$3k!?

WTF...

abit much i know but if your that desperate and you have spare cash i guess you could.. lol

[ONPSI]

The ones recently sold were mine..I'd offer him 2k pending they are MINT!

[antos]

Thanks guys, I saw the ones on eBay although after seeing the other ones that went for 2k the ones on eBay look like crap. I love the wheels but 3G is a bit steep for the condition they were in.
Onpsi-do you know if the guy buying them would part with them, if they have been paid for? If not I'll take them off your hands =}
Thanks for the help guys

[antos]

Sorry onpsi, I meant is the buyer on team4g? So I can get in contact with them. Cheers

[benozi]

A member on here jasevo3rs recently sold a set he had, Im pretty sure he got them over from NZ maybe worth looking over there somehow .

[ONPSI]

They were sold a few months ago...and I'm almost 100% he won't part with them..I'm sure the eBay ones are the only choice...

[antos]

thanks again guys, yeah got onto seller but he doesnt want to part with them
guess i might keep an eye on these ones on ebay and try nz.. anyone know anyone in nz?

[Evo-00x]

It'll be cheaper to buy 5 stud Enkei Tarmacs and then convert your GSR/EVO to 5x114.3 stud pattern.
Here's a cheap set, cant see pics though. Maybe worth a shot?
http://www.toymods.o...e-f1-tyres.html

[antos]

Thanks evo00x, did think about that, would I be able to get 8's under Evo 2/3 guards at the back? Fronts shouldn't be a problem (I think I remember seeing a thread which was magna or fto rears with lancer bearings or magna fronts with dto discs) will have to look it up). Cause the guy selling the wrc tarmacs on eBay has a couple of 17x7/8 sets in 5x114.3 too nearly half the price on the other set

[antos]

Not sure but would I be able to run 18x8.5 +30 on Evo 2/3?
Or can someone point me in the direction of thread please, had a bit of a look but must be blind lol

[ONPSI]

You won't fit a 8.5 rim under evo guards unless you run flares you could possibly get 8's but i'm pretty sure that is MAX!

[antos]

thanks again for the info, i forgot how informative some of you guys are and this site is lol

[Evo-00x]

Up front get Magna or FTO 5x114.3 hubs = piss easy and cheap.
Out back get EVO 4/5/6 hubs pressed in place of your existing GSR/EVO I-III hubs. You can reuse your existing bearings, or better yet buy new ones [recommended].
Use FTO 5x114.3 front and rear rotors all round as they will suit EVO I-III brake calipers.
When you do the math you can get out of it cheaper and you have a better range of wheel selection.

[mrcyborg]

even with my cyborg getting the rear axles and discs redrilled to 5 stud and swapping out the fronts the whole conversion to 5 stud and tarmacs was still well cheaper than getting 4 stud tarmacs.

[HYP04]

how much are you to looking to spend?
Say pretty good condition with some brake dusting, and 100km old KU36's?

[antos]

I got onto a set but have had to put on hold as the guy buying ny car had his finance fall through so unfort I am as well atm.. Thanks for the help guys

[HYP04]

If you dont end up getting the other set, I'll sell mine with as new (less than 100kms) 215/45/17 KU36's

Edited by HYP04, 20 October 2011 - 06:28 AM.