hey guys
Was driving my GSR (it is essentially stock apart from exhaust, filter, highflow turbo) today, all was well then I seen the check engine light come on. Car still drove fine. About 3 minutes later while I was stopped at lights, I thought - ill turn the car off and turn it on again maybe the light was up there in error -
after that the car would not start up and idle again - it cranks, starts up for about 3-4 seconds (it feels sluggish to rev) then it just instantly cuts out (as if ignition has turned off).
I checked all intercooler pipes, seem to be fine and if it was cracked or leaking i would assume the car would run rough not just cut out.
Checked vac lines, to my eye they seem fine.
Checked and cleaned Air flow meter and plug - this is more than likely the issue but I have spent hours on the net trying to find out any info with no luck.
Ive run outta options - has this happened to anyone before. I dont think its a fuel issue cos the car starts every time and theres spark - its just it refuses to idle for more than a few seconds.
any help would be much appreciate.d
Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
94 GSR will not idle
Started by 4G63JET, Aug 19 2011 11:49 AM
#1
Posted 19 August 2011 - 11:49 AM
#2
Posted 19 August 2011 - 12:02 PM
My ute done this the other day because I had forgotten to plug the AFM back in after checking the air filter so its possible that is your problem, I have a GSR AFM sitting in the shed your welcome too if you want to try another one? Flick me a PM if you want it.
#3
Posted 19 August 2011 - 12:42 PM
It can also be the idle stepper has pooed itself, I've had a very similar problem on 2 cars and it turned out to be the idle stepper, hope this helps
#4
Posted 19 August 2011 - 02:18 PM
#5
Posted 19 August 2011 - 03:18 PM
it will start and idle ok without afm even plugged in. not perfect but it would get you home. i dont think it your afm.
if it is isc it should run with foot on throttle but as its title suggests you will have no/poor idle control
if it is isc it should run with foot on throttle but as its title suggests you will have no/poor idle control
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.
#6
Posted 19 August 2011 - 11:44 PM
so where is this ISC valve - how can I replace it and is it interchangeable between other mitsus?
As one of the fellas said -wehn i disconnect the Air flow meter makes no difference so maybe its not that - and now that I think of it - the car WAS starting to have some low idle issues at times at the lights recently.
regards
Kim
As one of the fellas said -wehn i disconnect the Air flow meter makes no difference so maybe its not that - and now that I think of it - the car WAS starting to have some low idle issues at times at the lights recently.
regards
Kim
CP9A Evolution VI GSR
KTM 250 EXC 2 stroke
VZ Commodore
KTM 250 EXC 2 stroke
VZ Commodore
#7
Posted 20 August 2011 - 12:55 AM
Idle speed control is the black thing that is on the throttle body under the intake hole, goes in where the heater hoses do under the throttle body, they are the same as standard lancers and some magnas I'm pretty sure
#8
Posted 20 August 2011 - 12:57 AM
Idle speed control is the black thing that is on the throttle body under the intake hole, goes in where the heater hoses do under the throttle body, they are the same as standard lancers and some magnas I'm pretty sure
#9
Posted 20 August 2011 - 02:08 AM
still no go.
Ive been told the thing will idle even with a faulty AFM. Same goes for the Idle stepper
The crank angle sensor works fine
Thing just starts up idles for 2 seconds then dies like the keys been turned off. Checked all the vac lines.
Ahhhhhhhh :S
Ive been told the thing will idle even with a faulty AFM. Same goes for the Idle stepper
The crank angle sensor works fine
Thing just starts up idles for 2 seconds then dies like the keys been turned off. Checked all the vac lines.
Ahhhhhhhh :S
CP9A Evolution VI GSR
KTM 250 EXC 2 stroke
VZ Commodore
KTM 250 EXC 2 stroke
VZ Commodore
#10
Posted 21 August 2011 - 11:30 AM
Check what code the engine light came on for before changing parts. Also because you have unplugged the afm remember that when it comes up as a code.
4g63 GSR.
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users