Jump to content

Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Photo

94 GSR will not idle

- - - - -

  • Please log in to reply
9 replies to this topic

#1
4G63JET

4G63JET

    Member

  • Members
  • Pip
  • 4 posts
hey guys

Was driving my GSR (it is essentially stock apart from exhaust, filter, highflow turbo) today, all was well then I seen the check engine light come on. Car still drove fine. About 3 minutes later while I was stopped at lights, I thought - ill turn the car off and turn it on again maybe the light was up there in error -

after that the car would not start up and idle again - it cranks, starts up for about 3-4 seconds (it feels sluggish to rev) then it just instantly cuts out (as if ignition has turned off).

I checked all intercooler pipes, seem to be fine and if it was cracked or leaking i would assume the car would run rough not just cut out.

Checked vac lines, to my eye they seem fine.

Checked and cleaned Air flow meter and plug - this is more than likely the issue but I have spent hours on the net trying to find out any info with no luck.

Ive run outta options - has this happened to anyone before. I dont think its a fuel issue cos the car starts every time and theres spark - its just it refuses to idle for more than a few seconds.

any help would be much appreciate.d
CP9A Evolution VI GSR
KTM 250 EXC 2 stroke
VZ Commodore

#2
htgsr

htgsr

    HTGSR

  • Active Members
  • PipPipPip
  • 745 posts
  • LocationSurfers
My ute done this the other day because I had forgotten to plug the AFM back in after checking the air filter so its possible that is your problem, I have a GSR AFM sitting in the shed your welcome too if you want to try another one? Flick me a PM if you want it.

#3
Ian91

Ian91

    Advanced Member

  • Active Members
  • PipPipPip
  • 1,651 posts
  • LocationPomona, Sunshine Coast, QLD
It can also be the idle stepper has pooed itself, I've had a very similar problem on 2 cars and it turned out to be the idle stepper, hope this helps :)

#4
leadfoot

leadfoot

    Moderator

  • Moderators
  • 3,429 posts
  • LocationGold Coast
or even a faulty power transistor pack.

yes it's me KHUBNER


#5
jack be nimble

jack be nimble

    master of none

  • Donating Members
  • PipPipPip
  • 8,301 posts
  • Locationperth sor. 20 mins from brians place
it will start and idle ok without afm even plugged in. not perfect but it would get you home. i dont think it your afm.
if it is isc it should run with foot on throttle but as its title suggests you will have no/poor idle control
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.

#6
4G63JET

4G63JET

    Member

  • Members
  • Pip
  • 4 posts
so where is this ISC valve - how can I replace it and is it interchangeable between other mitsus?

As one of the fellas said -wehn i disconnect the Air flow meter makes no difference so maybe its not that - and now that I think of it - the car WAS starting to have some low idle issues at times at the lights recently.

regards
Kim
CP9A Evolution VI GSR
KTM 250 EXC 2 stroke
VZ Commodore

#7
Ian91

Ian91

    Advanced Member

  • Active Members
  • PipPipPip
  • 1,651 posts
  • LocationPomona, Sunshine Coast, QLD
Idle speed control is the black thing that is on the throttle body under the intake hole, goes in where the heater hoses do under the throttle body, they are the same as standard lancers and some magnas I'm pretty sure

#8
Ian91

Ian91

    Advanced Member

  • Active Members
  • PipPipPip
  • 1,651 posts
  • LocationPomona, Sunshine Coast, QLD
Idle speed control is the black thing that is on the throttle body under the intake hole, goes in where the heater hoses do under the throttle body, they are the same as standard lancers and some magnas I'm pretty sure

#9
4G63JET

4G63JET

    Member

  • Members
  • Pip
  • 4 posts
still no go.

Ive been told the thing will idle even with a faulty AFM. Same goes for the Idle stepper

The crank angle sensor works fine

Thing just starts up idles for 2 seconds then dies like the keys been turned off. Checked all the vac lines.

Ahhhhhhhh :S
CP9A Evolution VI GSR
KTM 250 EXC 2 stroke
VZ Commodore

#10
caged

caged

    Advanced Member

  • Active Members
  • PipPipPip
  • 470 posts
  • Locationsunshinecoast QLD
Check what code the engine light came on for before changing parts. Also because you have unplugged the afm remember that when it comes up as a code.
4g63 GSR.


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users