28 replies to this topic

[Gianni]

So housemate is moving so need to clear out my spares.
All parts located in templestowe Victoria.
All parts are Ono + postage


Coupe single pot fronts with hubs rotors and pads $50 pair
http://i1184.photobu...da/27481fc5.jpg

Evo 3 steering rack $100
http://i1184.photobu...da/79c34150.jpg

Kframes:
2 gsr front kframes 1 is out of alignment. The other has a busted captive nut but is fixable with a little skill $100 for both or $60 each
1 fwd kframe $25
http://i1184.photobu...da/ac95e867.jpg

Gsr front control arms pair $100
http://i1184.photobu...da/103fa4dd.jpg

Gsr rear calipers (no bracket) pair $60

Gsr rear control arms pair $100 or $150 with calipers
http://i1184.photobu...da/fa2ef0dc.jpg

Gsr front sway bar x2 $50 each (one left)
http://i1184.photobu...da/99372572.jpg

Gsr rear swaybar $50
http://i1184.photobu...da/fec24bf2.jpg

Crossmembers:
1x gsr crossmember with mounts $50
1x fwd crossmember with mounts $50
http://i1184.photobu...da/cc71290e.jpg

1.6L coil packs and ignitors (cb) on that note I'm stripping the whole motor down so if people want parts make an offer pair $50
http://i1184.photobu...da/eeec2dac.jpg

2x 4g63T waterpump and pully sets (crank aswell) $60 each
http://i1184.photobu...da/805bccbb.jpg

2x 2L startermotors $50 each
http://i1184.photobu...da/0985ac1a.jpg

2x alternators $50 each
http://i1184.photobu...da/556bbc8f.jpg

Clutch slave cyl with stock line $50
http://i1184.photobu...da/07009c5b.jpg

Stock vr4 exhaust manifold $50 (cracked)
http://i1184.photobu...da/4b493861.jpg

Vr4 standard fuel rail and injectors $75
http://i1184.photobu...da/3080ad16.jpg

Vr4 engine mount $50
http://i1184.photobu...da/dc508e40.jpg

Vr4 block side of mount $50
http://i1184.photobu...da/f8271ded.jpg

4g63 block to subframe mount brackets (vr4) pair $50
http://i1184.photobu...da/c33adb5a.jpg

Powersteering pump $50
http://i1184.photobu...da/97a14015.jpg

Cc non turbo air box and airflow meter $50
http://i1184.photobu...da/a3ba6537.jpg

Gsr handgrake cables $75 pair
http://i1184.photobu...da/f8525e38.jpg

Evo 3 intake manifold with new genuine gasket $250
http://i1184.photobu...da/1adafa4a.jpg

Evo3 cams. Came out of a blown motor $100
http://i1184.photobu...da/7c0ac181.jpg
http://i1184.photobu...da/f94d0b45.jpg this is the only damage and only on inlet cam. They seam to spin fine so I'm fairly sure they are straight

Magna oil cooler $50
http://i1184.photobu...da/3a9f3d74.jpg

Random ignitors and coilpacks also an idle stepper motor (I think same as above but off a 2L $25 each
http://i1184.photobu...da/072a2798.jpg

Boost gauge and controller valve $50 pair
http://i1184.photobu...da/31a74ac6.jpg

Last of all I have an na 2L out of a Hyundai. Would be a good daily (I'm running one currently in my cb) fun little upgrade from the 1.6 I still need to change a pair of valves on cyl 1 but once done and re assembled I'll be looking for $400
http://i1184.photobu...da/c383f042.jpg

I also have 2 throttlebodies $50 each standards with sensors and stepper motors

Pm or call 0424192150

Sold:
Gsr front sway bar x2 $50 each (one left)
http://i1184.photobu...da/99372572.jpg

2x catch cans. 1 atmospheric 1 sealed $50 pair or $30 each
http://i1184.photobu...da/3f8ec453.jpg

Gallant gsr aircon compressor $50
http://i1184.photobu...da/f9a42c07.jpg
aircon compressor mount bracket $50 ($75 for both compressor and bracket
http://i1184.photobu...da/d8fb396e.jpg

Evo3 mounts. Bush brand new but the block side is a little rusted. Needs to be re coated and sanded clean $100
http://i1184.photobu...da/32402844.jpg

Vr4 subframe with swaybar, steering rack and a hub. I can separate if needed $150 the lot
http://i1184.photobu...da/690d9328.jpg

Edited by Gianni, 19 March 2012 - 01:11 AM.

[BMGTZ]

please count how many turns lock to lock on the steering rack

[bazeng]

Which throttle bodies?

If VR4 Auspec I'm keen. If not I'm not interested.
Pm sent on other parts.

[Gianni]

Bmgtz. Are u talking the vr4 one or the Evo?

Baz. The throttles are off na. Ones a Hyundai. The others a 1.6. The inlet is the same. And same as my Evo one. What would be different between the lot. Internals?

[VIN18M]

PM sent.

[Gianni]

Evo steering rack is 2 and a bit turns.

[GSR-94T]

You have pm

[BMGTZ]

Bmgtz. Are u talking the vr4 one or the Evo?

Baz. The throttles are off na. Ones a Hyundai. The others a 1.6. The inlet is the same. And same as my Evo one. What would be different between the lot. Internals?

evo rack

[BMGTZ]

can you strap the rack to a plank of wood?


can you drop the packed rack to a suburb call sunshine?

I might grab those evo engine mounts too

Edited by BMGTZ, 16 January 2012 - 01:23 PM.

[Gianni]

Bump. Theres sone good crap here

[Gianni]

Baz, took the throttlebodies off. I now understand, the inlets the same, but the opposite side changes up against manifold. This I didn't know!

[OFFON-4]

whats the conditions of the handbrake cables?

[Gianni]

Handbrake cables are fine. clean, no frays.

[Gianni]

Bump

[Gianni]

Sorry people bit of a mistake with lower control arms. Just realized I wrote the wrong thing. It's actually rear hub assembly (so trailing arms, hubs, and control arms)

[Gianni]

Bump

[Gianni]

Bump

[DemonAssass7n]

do you still have the gsr crossmember if so how much to post to Logan Central, QLD, 4114

[Gianni]

Indeed I do pm sent

[Rumbuck]

Got any accelerator cables??