21 replies to this topic

[mrcyborg]

Item:Evo 3 front lower control arms (pair), with brand new ball joints SOLD
Item Condition:very good, brand new ball joints
Price:$200 pair
Extra Info:had a engineer slightly machine out where the ball joints go to fit brand new ball joints (can only order complete arms from mitsubishi) these are great for increasing track (extra 14mm track) and they sit slightly further forward than gsr/evo 1 for better castor angle also.
Location:Adelaide
Preferred Contact Method:PM dont always get to check for replys's
Pictures:example picture of one arm.
https://www.facebook...&type=3


Item:Evo 4g63t ac compressor have a couple of these two sold, still have one or two left
Item Condition: good, removed from low km motors
Price:$40
Extra Info:
Location:Adelaide
Preferred Contact Method:PM dont always get to check for replys's
Pictures:
https://www.facebook...&type=3

Item:VR4 6 bolt short motor.
Item Condition:as above, best to rebuild unless you despirate
Price:$500
Extra Info:came from vehicle with cooked head, bottom end looks all good still, possibly usable how it is, or rebuilt (was my plan)
Location:Adelaide
Preferred Contact Method:PM dont always get to check for replys's
Pictures:
https://www.facebook...&type=3

Item:Wedsport super light weight forged rims 15x6.5 et25 set of 4 these are 4x114.3 pcd
Item Condition:very straight rims, could do with paint, but hardly any scratches in metal
Price: $500
Extra Info:these are by far the lightest rims i have seen, can seriously hang one from little finger
Location:Adelaide
Preferred Contact Method:PM dont always get to check for replys's
Pictures:
https://www.facebook...&type=3

Item:4g63t alternator relocator brackets SOLD
Item Condition:custom made
Price:$40
Extra Info: EX bazeng custom made alt relocator bracket, bought years ago and never left the bag sadly, better off getting used than sitting around
Location:Adelaide
Preferred Contact Method:PM dont always get to check for replys's
Pictures:
https://www.facebook...&type=3

Item: Genuine sparco bonnet pins and, some brand boot tiedowns
Item Condition:new never used, not in packaging
Price:$50
Extra Info: had these set a side for my old EX lancer, and never got to use them.
Location: Adelaide
Preferred Contact Method:PM dont always get to check for replys's
Pictures:
https://www.facebook...&type=3

Item:custom fuel system SOLD
Item Condition:used but all good when removed
Price: $250
Extra Info:removed from my car putting back to standard for sale, consist of XTR surge tank, custom lines made by pirtek in braided teflon lines (very expensive!), bosch 910 motorsport pump with alloy bracket. had surge tank mounted in boot of hatch with braided lines to alloy plate where it went through body. connected to good year rubber line (best to replace). used factory pump as lifter (flows crap loads when no pressure required), divert standard feed line to go to surge tank, then other side of feed line gets fed from the bosch pump. had this on a fwd setup that made 180kw at wheels, fuel flow meter never left 3lt flow rate even on full power! dyno guy recons it would be good for 400 to 450hp set easy.
Location: Adelaide
Preferred Contact Method:PM dont always get to check for replys's
Pictures:

https://www.facebook...&type=3

this is a long shot on this forum, but hey
Item:g54b wide block gearbox cable clutch (has allowance for hydro setup on other side)
Item Condition: low km from jap importer feels tight
Price:$100
Extra Info:bought to use in my ex lancer also, never got to use it, paid to much for it, just need it gone
Location:Adelaide
Preferred Contact Method:PM dont always get to check for replys's
Pictures:
https://www.facebook...&type=3

Item:K&N pod filter oval x2 BOTH SOLD
Item Condition:good second hand
Price:$50 each
Extra Info:Specifically designed for mitsubishi vortex meter, has moutning plate for normal mitsi oval style maf sensors, these things are ment to be made with the cotton weave straight so it doesnt swirl the air and mess with the maf sensor, cost about 160 new. could do with a clean but otherwise good.
Location:Adelaide
Preferred Contact Method:PM dont always get to check for replys's
Pictures:
https://www.facebook...&type=3

Item:Alloy intake pipe for evo/gsr others? SOLD
Item Condition:good second hand
Price:$75
Extra Info: turbo side rubber could do with replacing, doesnt come with maf or filter. has pipe for plumb back bov
Location:Adelaide
Preferred Contact Method:PM dont always get to check for replys's
Pictures:
https://www.facebook...&type=3
https://www.facebook...&type=3

happy to send what ever, send me a pm with your location and ill get a price for you.
happy to get more info or pictures if required also.
whats the deal with the image link loader? cant get it to work?

Edited by mrcyborg, 25 February 2012 - 01:16 PM.

[EVL20T]

Whats involved with the alternator relocation?? obviously it sits where the A/C usually sits and the wiring needs to be extended

[Benno84]

Yeah just moves it to the firewall side

Prob similar to the jay racing one

What was it made for Evo or vr4?

[EVL20T]

I know that, but what else, i some kits will need the engine mount bracket to be shaved so the belt will clear, also need to know what belt is gonna suit, how its mounted etc

[baza]

Pm sent

[mrcyborg]

alt re-locator kit on hold.

sorry guys i dont know to much about it, i never got to fit it myself. it came from bazeng, so i dare say its a vr4 style mount.

[Benno84]

I was making one up myself and notice that the engine mount part was in the way and would have to be ground down

Would prob just have to measure the belt length once it was fitted

[vonapets]

PM Sent

[mrcyborg]

PM's replied

Alt relo kit sold

not sure what you guys mean when you say engine mount is in the way? which engine mount is in the way?
you usually remove the ac compressor, and use this bracket to mount the alt in its place? belt would be slightly diff size due to pullie change but other than that just wiring should be all.

[EVL20T]

Must be to suit the VR4 mount

Link below shows what gets shaved to fit

http://www.dsmtuners...relocation.html

Edited by EVL20T, 17 February 2012 - 04:46 PM.

[cairns d j]

morning mate.
new at this
Still got intake pipe and 1 air cleaner 4sale?
thanks darryl brisbane 0404014284

[DemonAssass7n]

do you still have the ac compressor if so is it possible to ship it to Logan Central QLD

[mrcyborg]

PM's replied

the Alt relo kit is now sold anyway. but i would have presumes it would have been ran off of the balancer where the ac belt comes off? there for no need to cut or shave the engine mount section, have never seen them done like that before. can see why you could run it off the ac bit and most likely even the ac idle bearing?

Cairns dj: send me a pm with your postcode and suburb and ill get a freight cost for you, still have one filter and the intake pipe.

[cairns d j]

cool'
im in
add'
dakabin 4503
brisbane
thanks darryl

[Paul]

PCD on wheels?

If they're 4x114.3, can you PM me a price posted to 2166. Thanks.

[mrcyborg]

cairns dj and paul, i have pm'ed you both.

alt relco, and lower control arms and filter sold

intake and filter on hold

[SIVART]

Hi man,

if the intake pipe falls through Im very keen bud

thanks
Travis

[clone]

Gday did you replace the balljoints in your control arms? did they have circlips?

[mrcyborg]

yes mate, under the rubbers they have a circlip, and then they press out. but we couldnt find direct replacements, it had to be machined out to take new ones, but it was very little that had to come out.

[mrcyborg]

updated items sold.