The other smaller bearing is 6.32-6.33mm or yeah, 1/4" as advised [see pic].
The 2nd pic is just FYI lol.
Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
#21
Posted 12 January 2013 - 09:24 AM
Evo-00x
-
- Donating Members
-
- 8,151 posts
4G63T AWD CC COUPE
- LocationNewcastle
When you removed the seal you would have had the circular needle bearing behind it which lives inside the output pinion [the bearing on the left in the pic]. Make sure you have one behind the seal!
The other smaller bearing is 6.32-6.33mm or yeah, 1/4" as advised [see pic].
The 2nd pic is just FYI lol.
The other smaller bearing is 6.32-6.33mm or yeah, 1/4" as advised [see pic].
The 2nd pic is just FYI lol.
AWD. 2 Litre. GTX3076R 0.82.
330kw atw @ 28psi 98 pump fuel.
372kw atw @ 28psi E85 Flexfuel.
EVOLVED AWD COUPE
WWW.EVOCOUPE.NET
330kw atw @ 28psi 98 pump fuel.
372kw atw @ 28psi E85 Flexfuel.
EVOLVED AWD COUPE
WWW.EVOCOUPE.NET
Back to top
#22
Posted 12 January 2013 - 10:29 AM
jack be nimble
-
- Donating Members
-
- 8,301 posts
master of none
- Locationperth sor. 20 mins from brians place
fancy that, a metric car from japan, built almost 25 yrs after aussie went metric and it has a 1/4" ball bearing in it...
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.
#23
Posted 01 February 2014 - 02:11 AM
RVR97
-
- Active Members
-
- 241 posts
Advanced Member
- LocationPerth. WA.
I found a similar size bearing on the ground after removing the transfer case.
Not sure does it belong to the output shaft, should there be any concern 
?
RVR 97 - begging for more torque!
RVR X3 2000
#24
Posted 01 February 2014 - 09:25 AM
evo-gsr
-
- Active Members
-
- 10,379 posts
Advanced Member
- LocationBuddhist Temple NSW
Unless you removed the end cover from your gearbox its from somewhere else.
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]
Trust in the master of taxis.... He will set you straight[/quote]
#25
Posted 01 February 2014 - 09:57 AM
RVR97
-
- Active Members
-
- 241 posts
Advanced Member
- LocationPerth. WA.
Nope I have never open the end cover from the gearbox.
I did remove the passenger drive shaft "I moved the shaft to a side enable me to remove the oil pan" is there a bearing there?
RVR 97 - begging for more torque!
RVR X3 2000
#26
Posted 01 February 2014 - 11:06 AM
evo-gsr
-
- Active Members
-
- 10,379 posts
Advanced Member
- LocationBuddhist Temple NSW
No.
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]
Trust in the master of taxis.... He will set you straight[/quote]
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
