45 replies to this topic

[Gianni]

I have a complete GSR I am parting out. Has a 4g63t but has bent valves and damaged pistons. The car ran, so in saying that the car is complete.

Specialty parts:

intake manifold $50
tailshaft $150
peddle box with clutch pedal $50
Clutch master $50
brake booster Evo $100
silver oil canaster $20
red carpets and bits and roof lining, whole lot, $100
doorcards $100
kframe and crossmember $150
front shafts $100
cluster $100
head $250
throttle body $80
front hubs $100
passenger evo mount $100
gearbox mount $50

Lenso concept Wheels, multistud, with Nanking tires 215x35x18 $500
http://i1184.photobu...da/8e2498f4.jpg

Fiberglass evo3 front bar with lip $150
http://i1184.photobu...da/31cf9b47.jpg
http://i1184.photobu...da/7d15be3d.jpg

Oil cooler with lines $100
http://i1184.photobu...da/b057deff.jpg

Evo3 coils and leads $80
http://i1184.photobu...da/ee14e1a7.jpg

510cc injectors with rail $150
http://i1184.photobu...da/cb693366.jpg
Also have vr4 ones with rail for $100

Evo 3 non LSD rear diff $300

GSR fuel tank $200

Sony xpload 6" $20
Pioneer 6x9's $30
Boost gauge $50
http://i1184.photobu...da/5195ba08.jpg

just pm me or sms me an offer or ask how much 0424192150

All prices are negotiable within reason
All prices are plus postage
All items are located SE Melbourne.

Sold items:
Recaro interior - custom red, comes front seat, rear seats, matching door cards and velour pillars and mats $700
Fiberglass Bonnet Evo 3 $250
GSR front guards
Shell
intercooler (70x300x600 total 770 end to end) $100
Pod filter $20
Aftermarket shocks with lowered kings $200 for all 4
black centre arm rest box and gear boot plastic With good nick black centre console lid and ashtray compartment $50
The above turbo, manifold, wastegate for $450
Atmospheric bov $50
GSR gearbox
GSR transfer case
Interior and electrical loom
Ecu
Mirrors

Edited by Gianni, 01 May 2012 - 11:50 PM.

[jack be nimble]

Is it evo or vr4 engine? Interested in head if vr4 complete with bent valves. Lol
How much for front engine mount near passenger side strut tower?

[evo-gsr]

Is this the green one...if so interested in the wheels..pics please?

Edited by evo-gsr, 17 April 2012 - 07:25 AM.

[Gianni]

Pics are comming
Pms and SMS' replied

[evo-gsr]

Thanks UNDIES....

[EVL20T]

Pics of turbo setup and pics of interior please, ballsack tripitaka

[Gianni]

Pics are a jizzing (cummin)

Interior has matching door trims, red valour roof lining and red valour plastic pieces to match also floor mats but a little old. Oh and back of divers seat ha a 10cm tear but easily resown

Mega jubblies

[EVL20T]

door trims, plastics and roof lining dont turn me on, just seats jizza

[Gianni]

Pm sent

[brisvr4]

I hate to say it but that turbo gate and manifold are all cheapo eBay stuff. You can pick the turbo up for $200 brand new on eBay.

[Gianni]

^ really. I've heard good things about them. But then again I've never used one before

[brisvr4]

Pretty much everything made by xspower is nothing but junk unfortunately. Google xspower fail.
Sorry to be the bearer of bad news mate.

[Gianni]

I mean I heard good things about the turbo ha ha ha. I know nothing about the manifold

[Gianni]

Well it is what it is. But this isn't the place to discuss brand names or specs on specific items. There are a lot of things here on the car to sell and I'd like to keep the thread to simple inquiries on items. People are more than welcome to discuss specifics on items if they are genuinely interested in buying that item by pm. And I'm sure people will do their own research if they need more info.

I thank brisvr4 for for helping out with the value of an item (as prices are mere speculation on what those kind of things normally sell at) and all items are Ono, but bad mouthing an item that u have no interest in buying doesn't have a place here. It just makes people not want to buy it. Just because someone bought one previously and it cracked doesn't mean this one will. I'm sure someone has bought (for example) a top of the range brand turbo and had it blow up or not last long, doesn't mean they all are like that.

In otherwords this isn't a thread for you opinions on a manufacturer. If u want to discuss that, then create a thread for it. Leave this thread for posts seaking certain parts. Anything further pm's are more than welcome. If you want to inform me on the quality of an item or brand, or think something is worth less, or maybe even more than I've advertised, pm them to me. I'll gladly listen and discuss it there as I've never used any of this stuff and the info would be good. Thanks

[EV0300]

Is the engine 6 or 7 bolt?

[jack be nimble]

Is the engine 6 or 7 bolt?

Gianni told me in a pm that the head is 7bolt. So 98% sure engine would be 7bolt also.

[brisvr4]

Both Mikee and I were simply stating facts as to the quality of the turbo etc.
You obviously haven't been around long enough to have experienced them.
Sure, big brand turbos occasionally die (usually due to install error) but almost every one of these die and I as one of the longest serving members here believe hat people have the right to know what they are getting themselves into if they were to purchase it.
Sorry if you miss out on a few dollars because the facts are out there but isn't that a better option than having your name dragged through the mud when someone spends good money on it and it dies soon after purchase.
Are you willing to return their money plus any other possible damage that may go along with it.

I would throw it on eBay and let people there do their own research on it.

[Gianni]

^ yes but tell me via pm. As also have been on here for a long time and not trying to screw anyone over. As for the car, it's a part out so every part has never been used by me, but the car was running, on low compression, due to timming belt skipping and bending valves. Because of that I can say turbo, manifold are running fine. And there will always be a risk buying any second hand turbo, or any second hand motor, or any second hand parts for that matter as to how long they will last. And if someone wants it I'll tell them that fact because it's all I know about it. But u aren't interested in the turbo and if you are, talk to me on pm

But eBay is a good idea. But still those opinions belong in a pm is all

Edited by Gianni, 17 April 2012 - 10:28 PM.

[leadfoot]

front hubs/knucle assembly and disks you can keep the calipers how much?

[Gianni]

Check ur pm's bro I sent u one yesterday