Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Power expected from tdo5 20g????
#1
Posted 28 May 2012 - 10:42 AM
#2
Posted 28 May 2012 - 12:06 PM
#3
Posted 28 May 2012 - 12:13 PM
GENUINE CE9A evo2 gsr track car
all fabrication BJP AUTOMOTIVE
winton 1:27.4 /// sandown 1:21.5 /// phillip island 1:49.2 /// haunted hills 59.1 /// eastern creek 1:35.4 /// winton short 1:01.4
#4
Posted 28 May 2012 - 12:52 PM
I have evo 8 560's, walbro, hks 272's, springs, retainers, forged engine, balance shafts removed,gt pumps 20g, evo3 ex manifold and dump, 055, bomz intake, full 3 inch, j spec cooler 2.5 pipes and ecmlink full version. Whats an honest figure at wheels on say 20psi for this setup? Or anything similar to comparewhat supporting mods do you have? what ecu etc etc...
#5
Posted 28 May 2012 - 12:53 PM
I made 270kw on 21psi with a stroker with everything and 100 octane fuel
Edited by DOUGMO, 28 May 2012 - 12:54 PM.
GENUINE CE9A evo2 gsr track car
all fabrication BJP AUTOMOTIVE
winton 1:27.4 /// sandown 1:21.5 /// phillip island 1:49.2 /// haunted hills 59.1 /// eastern creek 1:35.4 /// winton short 1:01.4
#6
Posted 28 May 2012 - 01:05 PM
#7
Posted 28 May 2012 - 10:04 PM
so your running 20psi now? How much power are you actually making?
Still running the stock air box?
What cat and mufflers? Who is tuning it? Cams dialed in? Running 98 octane?
GENUINE CE9A evo2 gsr track car
all fabrication BJP AUTOMOTIVE
winton 1:27.4 /// sandown 1:21.5 /// phillip island 1:49.2 /// haunted hills 59.1 /// eastern creek 1:35.4 /// winton short 1:01.4
#8
Posted 29 May 2012 - 04:25 AM
I have evo 8 560's, walbro, hks 272's, springs, retainers, forged engine, balance shafts removed,gt pumps 20g, evo3 ex manifold and dump, 055, bomz intake, full 3 inch, j spec cooler 2.5 pipes and ecmlink full version. Whats an honest figure at wheels on say 20psi for this setup? Or anything similar to compare
on 20psi around 220-240kw
I made 270kw on 21psi with a stroker with everything and 100 octane fuel
I made 214kw on a 16G, aftermarket ECU, ID1000 injectors, standard downpipe with 3" exhaust, intercooler and piping, fuel pump etc. I would think 220kw would be a low end figure if you can get a good tune.
#9
Posted 29 May 2012 - 04:48 AM
Same ecu, same tuner, same fuel, same dyno, same gear ratio.
The car with the top end supporting mods obviously made more power.
5kws here, 10kws there... It all adds up.
also keep in mind, 3.9 ratio boxes will show more power on the dyno than a 3.5 box if done in the same gear.
AMG | http://www.4gtuner.c...mmc-galant-amg/
GVR4 | http://www.4gtuner.c...shi-galant-vr4/
Springy Motors | Autronic | Motec
#10
Posted 29 May 2012 - 09:11 AM
#11
Posted 29 May 2012 - 09:14 AM
#12
Posted 29 May 2012 - 08:45 PM
#13
Posted 02 June 2012 - 08:05 AM
I've seen 16gs make 160kw - 220kws. Only difference, i/c pipin and I/C type, intake manifold (cyclone/eci multi), t/b.
Same ecu, same tuner, same fuel, same dyno, same gear ratio.
The car with the top end supporting mods obviously made more power.
5kws here, 10kws there... It all adds up.
also keep in mind, 3.9 ratio boxes will show more power on the dyno than a 3.5 box if done in the same gear.
My 16G made 189kw @ wheels on 15psi with 264ยบ cams, 510's & evo afm, s-afc, 38mm w'gate, 3" exhaust from o2 housing back, no muffler, stock intercooler and piping on 98 octane.
Would really like to get a link ecu into it and see what it can do with a proper tune and some more boost (have also swapped the cooler and piping for 'evo 0' stuff)
Suprised no one has asked what compressor cover OP will be using, a td06 cover will make more power than a td05 cover that's been machined to fit the bigger wheel.
Similarly the amount (if any) that the turbine wheel is back-cut will make a big difference also.
#14
Posted 02 June 2012 - 01:15 PM
So that a stock motor with td0520g. 750cc injectors. 3" exhaust, cooler, intake. (obviously injectors ect can handle more. Just need cams
#15
Posted 02 June 2012 - 01:53 PM
J-spec white RS-Evolution GVR4 - soon to move for the first time in 2 years
A-spec maroon GVR4
A-spec silver GVR4 - sold and racing!!!
#16
Posted 02 June 2012 - 02:04 PM
AMG | http://www.4gtuner.c...mmc-galant-amg/
GVR4 | http://www.4gtuner.c...shi-galant-vr4/
Springy Motors | Autronic | Motec
#17
Posted 03 June 2012 - 01:00 AM
Chosen Weapons:
WideBody Galant GSR 4g63 N/A+T Hybrid 1st/3rd gen +AWD
Audi A3 slow POS
#18
Posted 03 June 2012 - 01:27 AM
It's an awd coupe. Non LSD so only front and rear drivers side
#19
Posted 12 July 2012 - 01:55 PM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users