hello everybody i have recently got myself a ca lancer 1990 modle and took out the sohc engine and put a cb gsr dohc engine from a 3 door in it the thing flys it has extractors and 2inch sports exhaust i think the engine has better cams too it idols lumpy as but now im havin problems with braking i have changed hubs to gsr with slotted roters and gsr calipers and still not good and now it seems like the passenger side is stayin on a little bit i also got a bigger master cylinder i havent changed the booster yet i was thinkin a brake controler will fix it any ideas
Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Back to top
#2
Posted 01 July 2012 - 10:32 AM
jack be nimble
-
- Donating Members
-
- 8,301 posts
master of none
- Locationperth sor. 20 mins from brians place
jack the front up and see if 1 wheel is dragging. it is the deformed square profile of the rubber seals inside the caliper that pull the pads back. these are maintenance free. however there are caliper slides on 1 and 2 pot calipers. these slides need to be kept clean and lightly lubed. a siezed slide is the most common reason for brakes dragging. only other reason is if you run willwoods ar similar without dust boots that can allow the pistons to sieze
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.
#3
Posted 02 July 2012 - 02:15 AM
cagsr
-
- Members
-
- 4 posts
Newbie
- Locationbrisbane
yea i fixed it but my roter is now warped oh well i think its time for some new wheel bearings and roters
plus i found that the calipers were loose both sides from where they bolt on gee luck i looked
plus i found that the calipers were loose both sides from where they bolt on gee luck i looked
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users
