Hi. I am passionate to purchase a 2nd hand Proton Satria (Mit Mirage) with a standard 4G93 for modification as my weekend car and personal interest. Need to gather some advice from veterans like you guys.
I like NA just like Ferrari always does (excluding F40). But people always advice me to give up and start looking for Vtecs and Turbos.
Let's not limit to any budgets, but not until NOS comes in. Any advice?
Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Back to top
#2
Posted 24 August 2012 - 02:47 PM
EV0300
-
- Active Members
-
- 1,502 posts
Advanced Member
- LocationVictoria, Geelong
if you wana make big power out of a 1.8 with out turbo be prepared to spend $$ you could look into Mivec thats mitsus variable valve timing
#3
Posted 24 August 2012 - 09:36 PM
jack be nimble
-
- Donating Members
-
- 8,301 posts
master of none
- Locationperth sor. 20 mins from brians place
Full roller engine, custom extra light pistons and rods. And spin it to 18k rpm.
Probably need to look towards modern motorcycle engine design for your ideas.
Probably need to look towards modern motorcycle engine design for your ideas.
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.
#4
Posted 24 August 2012 - 10:10 PM
bazeng
-
- Active Members
-
- 9,899 posts
Gday maaaate
- LocationMelbourne
Does it have to be 93?
New gen mirage or Old gen?
Go 4G64 / G4CS 2.4l block, use a custom crank with short stroke or a crank like the ones from 4G61 t (6 bolt only I think). Super long rods, short pistons, big bore, mivec head.
And run a dog box so you can shift at crazy RPMs!
New gen mirage or Old gen?
Go 4G64 / G4CS 2.4l block, use a custom crank with short stroke or a crank like the ones from 4G61 t (6 bolt only I think). Super long rods, short pistons, big bore, mivec head.
And run a dog box so you can shift at crazy RPMs!
AMG | http://www.4gtuner.c...mmc-galant-amg/
GVR4 | http://www.4gtuner.c...shi-galant-vr4/
Springy Motors | Autronic | Motec
#5
Posted 24 August 2012 - 10:48 PM
jack be nimble
-
- Donating Members
-
- 8,301 posts
master of none
- Locationperth sor. 20 mins from brians place
Hey check out jayrome thread with the 3G head on the vr4 block. That might be your thing
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.
#6
Posted 25 August 2012 - 12:53 AM
Missile
-
- Active Members
-
- 1,694 posts
Member No. 00004
- LocationPerth, WA
Forum Member 'PAUL' had a mid level 4g93p in a satria - was pushing 100kW atw and he did a best time of 14.3. Below mod list to show the $$$'s and effort to go in to that spec (and considering Paul did a lot of the work himself the costs were not huge)
Glenn (Spektor - do not know if he is on t4g) has a stroked 1.9l 4g93/92 hybrid (stroked 4g93p with mivec head). Use this as inspiration, install quad throttle bodies and you will leave all of the honda boys in your wake.
Engine was rebuilt with 11.0-1 pistons, block bored out 40thou, head shaved, Camtech cams, adjustable cam gears, RPW 4-1, 2.25" mandrel bent exhaust, CAI. Blitz SAFC, 60mm TB
Glenn (Spektor - do not know if he is on t4g) has a stroked 1.9l 4g93/92 hybrid (stroked 4g93p with mivec head). Use this as inspiration, install quad throttle bodies and you will leave all of the honda boys in your wake.
Current projects: Mitsubishi ca5a/ce9a awd hybrid
Daily Rip: CE9A Evo II
www.cardomain.com/id/m1ssile
Built not Bought
#7
Posted 25 August 2012 - 10:16 AM
4GForever
-
- Members
-
- 3 posts
Newbie
- LocationMalaysia
Thanks guys.
Btw, I'm going for the old generation of Mit Mirage. I read the article about John Bettie's 4G93 @ 218Bhp too.
I am going for below:
Tomei 305 Degree Cam
Haltech ECU
4 Throttle
Over bore to 82mm
Forged high compression pistons
Rev at 15k RPM
Pardon me if I'm a bit crazy.. haha... I was also thinking of re-constructing/switch the entire body with Aluminium Alloy and Acrylic glass to reduce the weight from 1 tonne to 700kg (maybe).
What do you guys think?
Btw, I'm going for the old generation of Mit Mirage. I read the article about John Bettie's 4G93 @ 218Bhp too.
I am going for below:
Tomei 305 Degree Cam
Haltech ECU
4 Throttle
Over bore to 82mm
Forged high compression pistons
Rev at 15k RPM
Pardon me if I'm a bit crazy.. haha... I was also thinking of re-constructing/switch the entire body with Aluminium Alloy and Acrylic glass to reduce the weight from 1 tonne to 700kg (maybe).
What do you guys think?
#8
Posted 25 August 2012 - 02:21 PM
EV0300
-
- Active Members
-
- 1,502 posts
Advanced Member
- LocationVictoria, Geelong
#9
Posted 25 August 2012 - 02:46 PM
BMGTZ
-
- Donating Members
-
- 4,554 posts
Grumpy old man from the school of hard knocks
- Locationsouthside of perth WA
15k rpm that will be an uber expensive engine !!
If you get this to happen....I want a the hear it at full noise
If you get this to happen....I want a the hear it at full noise
BRIAN
Black evo 1 full road rego and done properly/legally
I have heaps of parts...but never the one I need.
#10
Posted 25 August 2012 - 04:42 PM
jack be nimble
-
- Donating Members
-
- 8,301 posts
master of none
- Locationperth sor. 20 mins from brians place
Maybe you could transplant twin hyabusa engines, one for the front axle and the other for the rear.
You will get your required power to weight and big rpm limit plus awd...
You will get your required power to weight and big rpm limit plus awd...
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.
#11
Posted 25 August 2012 - 10:17 PM
caged
-
- Active Members
-
- 470 posts
Advanced Member
- Locationsunshinecoast QLD
#12
Posted 29 August 2012 - 02:05 AM
4GForever
-
- Members
-
- 3 posts
Newbie
- LocationMalaysia
Happy to hear you guys supports.
Dear Cage,
Thank you, I think Engineering firm here can custom make any rods with heavy duty materials. Blowing up the engine, gives me a chance to change a new one... Haha...
Btw, will update all once project done. (Just the matter if this Stein comes out a junk or a monster)
Dear Cage,
Thank you, I think Engineering firm here can custom make any rods with heavy duty materials. Blowing up the engine, gives me a chance to change a new one... Haha...
Btw, will update all once project done. (Just the matter if this Stein comes out a junk or a monster)
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
