Hey peeps
I've just upgraded to a td06 with external gate
Using my atmo bov which I had on previously.
Problem is that now the bov isn't opening under at shift (or at all) I checked the vac line and its getting suction and psi (it's still not opening with no vac source as well) I can push the valve open by hand so it doesn't seem stuck. I did take the bov apart and paint the top of it. So maybe I haven't assembled it right. Do I maybe have to regrease it?
Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
#1
Posted 24 November 2012 - 01:42 AM
Gianni
-
- Active Members
-
- 2,433 posts
Advanced Member
- LocationMelbourne
Back to top
#2
Posted 24 November 2012 - 01:48 AM
evo-gsr
-
- Active Members
-
- 10,379 posts
Advanced Member
- LocationBuddhist Temple NSW
A good lube always works wonders....
Edited by evo-gsr, 24 November 2012 - 01:49 AM.
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]
Trust in the master of taxis.... He will set you straight[/quote]
#3
Posted 24 November 2012 - 02:12 AM
Gianni
-
- Active Members
-
- 2,433 posts
Advanced Member
- LocationMelbourne
#5
Posted 24 November 2012 - 02:50 AM
Gianni
-
- Active Members
-
- 2,433 posts
Advanced Member
- LocationMelbourne
Sweet. I was slightly worried 
Any specific line or grease I should use?
Any specific line or grease I should use?
Edited by Gianni, 24 November 2012 - 02:50 AM.
Gianni
#6
Posted 24 November 2012 - 05:56 AM
evo-gsr
-
- Active Members
-
- 10,379 posts
Advanced Member
- LocationBuddhist Temple NSW
Vaseline....Ky.....?
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]
Trust in the master of taxis.... He will set you straight[/quote]
#7
Posted 24 November 2012 - 08:01 AM
jack be nimble
-
- Donating Members
-
- 8,301 posts
master of none
- Locationperth sor. 20 mins from brians place
Use rubber grease.
Or if we are continuing the jokes, just spit on it.
Or if we are continuing the jokes, just spit on it.
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.
#8
Posted 24 November 2012 - 11:08 AM
BMGTZ
-
- Donating Members
-
- 4,554 posts
Grumpy old man from the school of hard knocks
- Locationsouthside of perth WA
for a nice tight ....honey
BRIAN
Black evo 1 full road rego and done properly/legally
I have heaps of parts...but never the one I need.
#9
Posted 24 November 2012 - 11:22 AM
caged
-
- Active Members
-
- 470 posts
Advanced Member
- Locationsunshinecoast QLD
#10
Posted 25 November 2012 - 10:22 PM
Gianni
-
- Active Members
-
- 2,433 posts
Advanced Member
- LocationMelbourne
The re grease seams to have solved the problem. Because I'm now running the external gate it's hitting 10psi instead of the 22 it used to Untill tune. So not as loud as previous. Sounds good as though
Gianni
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
