Hi, Is there anyone in the Ipswich (Brisbane) area that has the ability and could do me a huge favour and scan the ECU for the engine fault light code that I have at the moment.
I'll try mitsubishi but I've been told by them that so far the imports the've tried the MUT wont recognise it.
If all else fails it might be time to invest in a cable and software, Evoscan or something that can talk to the ECU, anyone have any suggestions?
Thanks
Phil
Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
#1
Posted 02 December 2012 - 06:37 AM
philsth
-
- Active Members
-
- 122 posts
Advanced Member
- LocationBrisbane
Back to top
#2
Posted 02 December 2012 - 06:53 AM
evo-gsr
-
- Active Members
-
- 10,379 posts
Advanced Member
- LocationBuddhist Temple NSW
Evoscan is what you need...
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]
Trust in the master of taxis.... He will set you straight[/quote]
#3
Posted 02 January 2013 - 08:23 AM
philsth
-
- Active Members
-
- 122 posts
Advanced Member
- LocationBrisbane
turned out to be EGR, after a quick look around found a pipe off pushed it back on all fixed.
GSR gone. Now driving 14 lancer ralliart but miss my GSR.
#4
Posted 02 January 2013 - 10:43 AM
MDK87
-
- Active Members
-
- 2,364 posts
Hyundai's can't fly!!
- LocationBrisbane
Good to hear you got it sorted dude.
I thought there was a way of reading fault codes as the CEL blinks an error code when pin 4 of the OBDII connector is held to ground? Similar to how we do it on the VR4.
Anyway, while we're on the topic. How much does the evoscan package go for and where do yoou get it?
I read somewhere that it has the capability to assist with bleeding the AYC unit, however it not as reliable/accurate as a MUT.. Is this true?
And what is a multi-use tester anyway? A MMC only thing?
I was thinking of getting evoscan because I want to bleed the AYC unit.
Is there a write-up/tech. docs on this procedure?
I thought there was a way of reading fault codes as the CEL blinks an error code when pin 4 of the OBDII connector is held to ground? Similar to how we do it on the VR4.
Anyway, while we're on the topic. How much does the evoscan package go for and where do yoou get it?
I read somewhere that it has the capability to assist with bleeding the AYC unit, however it not as reliable/accurate as a MUT.. Is this true?
And what is a multi-use tester anyway? A MMC only thing?
I was thinking of getting evoscan because I want to bleed the AYC unit.
Is there a write-up/tech. docs on this procedure?
#5
Posted 14 January 2013 - 10:14 AM
philsth
-
- Active Members
-
- 122 posts
Advanced Member
- LocationBrisbane
Good to hear you got it sorted dude.
I thought there was a way of reading fault codes as the CEL blinks an error code when pin 4 of the OBDII connector is held to ground? Similar to how we do it on the VR4.
Anyway, while we're on the topic. How much does the evoscan package go for and where do yoou get it?
I read somewhere that it has the capability to assist with bleeding the AYC unit, however it not as reliable/accurate as a MUT.. Is this true?
And what is a multi-use tester anyway? A MMC only thing?
I was thinking of getting evoscan because I want to bleed the AYC unit.
Is there a write-up/tech. docs on this procedure?
Good to hear you got it sorted dude.
I thought there was a way of reading fault codes as the CEL blinks an error code when pin 4 of the OBDII connector is held to ground? Similar to how we do it on the VR4.
Anyway, while we're on the topic. How much does the evoscan package go for and where do yoou get it?
I read somewhere that it has the capability to assist with bleeding the AYC unit, however it not as reliable/accurate as a MUT.. Is this true?
And what is a multi-use tester anyway? A MMC only thing?
I was thinking of getting evoscan because I want to bleed the AYC unit.
Is there a write-up/tech. docs on this procedure?
Here's their website http://www.evoscan.com/ I'm still learning how it all works so I can't really answer your questions. Have a look on the site there is quite abit of info there.
cheers
GSR gone. Now driving 14 lancer ralliart but miss my GSR.
#6
Posted 22 February 2013 - 11:35 AM
blackvr
-
- Active Members
-
- 574 posts
Advanced Member
- LocationAdelaide
The Evoscan program isnt too bad, but has its bugs.. It will only AYC bleed Evo 5/6 and VR4 legnums. At least, I cant get it too work on later models ?? Hamish Ahern the program developer essentially used his Evo 6 to develop it.. and not appear to test it on later models ! The data logging works fine on later models though.
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users
