Ralliart used to do GroupA VR4 "Green" knuckles, but these are a bit difficult to find these days ( or are still on rally VR4s and NOT for sale). While they are a bit stronger than standard knuckles, and have modified steering arms, whats the alternative ? A bit of fiddling on the lathe came up with these. And they were put to the test in competition last week and no more puming the brake pedal to get some brake action !
Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
#1
Posted 16 December 2012 - 01:37 AM
blackvr
-
- Active Members
-
- 574 posts
Advanced Member
- LocationAdelaide
Thought I might share some photos on my solution to the dreaded brake knock off that surfaces when pushing VR4s hard thru hairpin corners..Having the brake pedal hit the floor can be a bit disconcerting to say the least .
Ralliart used to do GroupA VR4 "Green" knuckles, but these are a bit difficult to find these days ( or are still on rally VR4s and NOT for sale). While they are a bit stronger than standard knuckles, and have modified steering arms, whats the alternative ? A bit of fiddling on the lathe came up with these. And they were put to the test in competition last week and no more puming the brake pedal to get some brake action !
Ralliart used to do GroupA VR4 "Green" knuckles, but these are a bit difficult to find these days ( or are still on rally VR4s and NOT for sale). While they are a bit stronger than standard knuckles, and have modified steering arms, whats the alternative ? A bit of fiddling on the lathe came up with these. And they were put to the test in competition last week and no more puming the brake pedal to get some brake action !
- micky_vr4 likes this
Back to top
#2
Posted 16 December 2012 - 03:07 AM
bazeng
-
- Active Members
-
- 9,899 posts
Gday maaaate
- LocationMelbourne
Nice work there! Thanks for sharing!
AMG | http://www.4gtuner.c...mmc-galant-amg/
GVR4 | http://www.4gtuner.c...shi-galant-vr4/
Springy Motors | Autronic | Motec
#3
Posted 16 December 2012 - 08:13 AM
clone
-
- Active Members
-
- 1,075 posts
self employed bum
- LocationTownsville
#4
Posted 16 December 2012 - 02:35 PM
jack be nimble
-
- Donating Members
-
- 8,301 posts
master of none
- Locationperth sor. 20 mins from brians place
what happens here?
does the bearing outer move inside the knuckle when turning hard? how tight do you tighten the retaining ring?
nice work too.
does the bearing outer move inside the knuckle when turning hard? how tight do you tighten the retaining ring?
nice work too.
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.
#5
Posted 16 December 2012 - 10:39 PM
blackvr
-
- Active Members
-
- 574 posts
Advanced Member
- LocationAdelaide
The bearing flexes the retaining circlip and consequently moves apart a few thou... resulting in the brake rotor pushing the brake caliper pistons in . Subsequently, the brake pedal has to pump the pistons out to maintain pressure. The retaining ring is tightened "Fn tight"
Edited by blackvr, 17 December 2012 - 11:42 AM.
#6
Posted 17 December 2012 - 04:16 AM
jack be nimble
-
- Donating Members
-
- 8,301 posts
master of none
- Locationperth sor. 20 mins from brians place
Awesome
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.
#7
Posted 16 March 2014 - 11:17 AM
kaptainballistik
-
- Members
-
- 7 posts
Dirty rotten cheating 4WD
- LocationSydney
WIth the retaining ring, Did you fabricate it or was it available from the bearing shop?
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
