32 replies to this topic

[EIII]

Sold the car, bought a boat - say no more..

Updated

Wiseco Forged pistons 85.5mm 2.0 8.5:1 comp ratio
Nearly new - still have the black ceramic coating hardly marked on the skirts, includes pins & locks
Not a mark on the crowns (will wash the carbon off!)
Rings would be fine with a file as clearances were not overly tight (hence the change!!)
$200 firm

E3 16G - ran me to an 11.575 @ 115 mph, no shaft play, $250 posted
Complete inc wastegate and oil / water lines

E3 airbox $20

E3 AFM no honeycombe $50

E7 pink top injectors $50 ono

E3 rocker cover $50

E3 intake manifold $ 50

E3 throttle body $20

E3 Head
Head has bronze K-liners, new valve stem seals - some det on the face, plenty of meat, Minimal shave required if you want a new looking head.
$200 ea

E3 cams inc gears $50

Lower engine cover, timing cover $20

E3 front swaybar $20

E3 oil filter housing $50

ARP bolts for factory rods $20

Some other random bits (AC pump, PS pump), just ask, you never know.


Looking to get rid of what's left



Can ship

Edited by EIII, 03 November 2013 - 08:26 AM.

[JET-65R]

What area are u from mate?

[EIII]

Perth, 'South of the River' as we call it over here..

[jack be nimble]

Piston suit evo or vr4? Std bore or +20. i know you said 85.5 and your block is evo and all, but just confirming/hoping...

Edited by jack of all, 06 April 2013 - 12:31 AM.

[BMGTZ]

Hi mate,

i will grab the stock e3 ECU and intercooler. If you still have my number....sms me a time to collect and pay.

Please hang onto the tomei ECU for a day or so till I tell some one it is there.

do you have an evo {7 bolt} sump?

[4geez]

and if the above person doesn't take it ill grab the tomei ecu

[EIII]

Will sort thru dibs and see who got in first for what. Got some pm's also..

Organising photos...

Pistons are 100% evo (7 bolt) 20 thou over..

[EIII]

Brian, just checked - yes I have a sump. Has pickup still bolted on and have the baffle plate $50.
Intercooler has taken a wack on the back, nice half moon in it unbeknown to me - will revisit the price after I clean it up...

Also have a MAP oil drain line - SS with AN fittings / ally flanges $100. Also have a flange for a Garrett turbo to suit + $20

Have also got BOV's, Wastegates etc.

[clone]

what kind of bov s?

[EIII]

BOV's are E3 ones.. Same for wastegates.



Pistons

Spent 30 seconds rubbing with a rag and some carby cleaner.









Should rename this EIII's $50 - or multiples of, Too cheap parts Sale !

Edited by EIII, 18 May 2013 - 10:41 AM.

[evo-gsr]

Pm'd

[EIII]

OK, sorting thru PM's gents.

It's obvious I need 10 ecus at this price, along with AFM's and centre consoles!

Few more Tomei ecu's wouldn't go astray either.

Will update soon, however don't make a request for:
ECU
AFM
Tomei ECU
Sump
Console
Rocker Cover
MAP oil return

As I have more than enough interest in those..

Dibs / info have been placed or requested for:
Turbo
Injectors
Drivers window switch
E3 air filter box

Cheers

[Geo&Kez]

Pm'd for brackets Ben.

[hendo]

pm sent

[holim]

pm'd

[4geez]

hey bud just to let ya know i got given a microtech for next to nothing so dont need it any more just on the off chance ya were gunna offer the tomei ecu to me
cheers anyway

[Hypo]

If you don't get a better offer for the tyres I will pay $800 including postage to Brisbane. They are a bit soft for a on going track day tyre but I would use them for one session and then go back to my hards.

[EIII]

Gents, finally got pix of the stuff to respond to PM's - been hellish the past week..

Will update everyone / respond in the next day or so..

Bare with me - 4yr and a 6 month old that won't sleep! Both girls and I'm copping attitude alrady!

[jack be nimble]

At least the garage is empty now so you got a dog house to be sent to.

[EIII]

Pm'd for brackets Ben.

Yes, have bracket mate.