PAR dog box. This box is as good as brand new. When i bought it i was told it had been fitted and run through the gears on the hoist. As soon as i got it my gearbox builder stripped it down to inspect it. There is no wear at all on the dogs. A couple of the bearings werent in perfect condition so we replaced all of them and all seals too. it retains the standard 5th gear and uses the standard input shaft. runs a 3.909 ratio. $5000 DEPOSIT TAKEN
forged 4g63 6 bolt. CP pistons, eagle rods, balance shafts removed, ferrea 1mm oversize valves kelford 272 cams, BC springs and retainers, fidanza cam gears, ARP's 3g lifters, mls headgaket. long motor done less than 15000km and is in excelent condition. I bought the engine second hand and then removed the head to get bigger valve seats cut. The bores are mint.the head was skimmed as well as new valve stem seals. $3000
FP HTA3586 The turbo is in excelent condition with minimal shaft play. It currently has a .86 ex housing on it but also comes with a 1.06. This turbo is awesome. I cant recommend these enough.I made 414awhp at 19psi.Still had heaps left in her as there were a couple of restrictions I needed to sort out and no timing. $1700
Performance Metalworks smim. Is in good condition and comes with a 80mm throttle body. $800
NPC twin plate clutch. has carbon discs and is also in excellent condition. $750 SOLD
3inch stainless coldside intercooler piping. polished and in near new condition. $400
4inch intake pipe. $100
1000cc FIC injectors. Near new done less than 1000km. $300
bosch 044 fuel pump. $100
4 bolt viscous LSD. excellent condition. comes with axles $750
There will be more parts added soon and Ill get some photos up tonight. All parts to suit GVR4. If you have any questions pm me or txt 0411367475
Thanks
Brad
Edited by bps79, 19 May 2013 - 05:51 AM.
Back to top
