103 replies to this topic

[slo_rvr]

Do you have the rear drivers side seat belt? i'm just after the black surround for the buckle.

[moonchook]

Do you have the rear drivers side seat belt? i'm just after the black surround for the buckle.

able to get me a picture of the bit you are after?

[moonchook]

Hey I'm after rear speaker covers and the center glove box/drink holder cover. if they're in good condition.

Thanks

here are the speaker covers,



what do you mean by glove box/drink holder cover? the middle arm rest bit?

[slo_rvr]

Do you have the rear drivers side seat belt? i'm just after the black surround for the buckle.

Yes but having trouble with my phone so can only mms. Could I get your number?>

[Django]

hey chook do you still have the steering wheel, how much?

[moonchook]

yeah man still have it just needs to be pulled, make me an offer, not sure if i can send through aus post might have to be couriered because airbag is classed as explosive I think.

[Django]

Hmmm, damn aus post. $25 + postage?

[moonchook]

allright pulled the engine on the weekend and stripped it to have a look see what it was like inside. had planned to keep some of it but gonna put it all up for sale, want it gone as I don't want to be tied to this rental property with the burden of crap and don't want to be moving with heavy and oily parts!

everything is priced to sell, prices are negotiable, pics to come in daylight, sorry if my descriptions are confusing, pics will tell all.

pickup only on the block and head, can probably post the other stuff if I can find strong enough boxes.

1. td05 16g turbo, shaft is nice and tight no oil leaks, was rebuilt with parts from japan (ebay kit) shortly after car was taken off road.

included is waste gate, dump, turbo manifold.



$500

2. 4G63T intake manifold and throttle body and support bracket piece.

$140



3. 510cc injectors and fuel rail



$150

4. ECU (M/T) and Loom

$150 (still in car but can pull)

5. Intake pipe, bov and airbox K&N panel filter

$100

6. Sump and oil return



$150

7. 4G63T RVR HSGR head



complete head, cams, gears, lifters, cam cover, sensor, valves complete head.

$300

8. coil pack and plug leads

$60

9. 4G63T RVR HSGR 7 bolt long motor.



alright history of this is engine is: sustained damage to no 1 rod bearing (disintegrated the bearing almost completely) due to oil starvation was rebuilt with new rod bearings however knock was still present on start up and engine blew a little smoke (suggesting oil getting past rings) engine ran well and pulled hard last time it was driven

would be a good candidate for a stroker or oversized pistons build or you may get by with a crank grind and oversized rod bearings and new rings.

pics will show condition of bores.

included is block, crank, rods, pistons, rings, oil filter base, oil pump, pulleys, harmonic balancer. can include used drive belts and a new GMB water pump and whatever brackets that were on the block that you want to take have all the bolts floating around, was bagging and labeling as I went until I ran out of bags.

$600

clutch (exedy used), flywheel (was machined last time clutch was done), pressure plate



$100

alternator

$100

Starter motor

$100

as for the rest of the wreck,

all I need to pull from it is the loom, ecu and a few bits promised to others, which I will do after my housing inspection thursday.

would be happy for someone to make me an offer on the rest of the wreck/rolling shell,

plenty of good parts left in the old girl head lights, CV's, suspension (stock), tail shaft, LSD diff, pajero IO mags, body kit, flares, brakes, steering rack, steering wheel, transfer case, back seats, all glass, doors etc heaps of good parts for doing up your SSG or spares for your HSGR.

pm me an offer or make an offer here and we can work something out.

Edited by moonchook, 21 August 2013 - 04:42 AM.

[blackvr]

PM sent

[moonchook]

Is my pricing fair on the turbo? Make an offer!

[deepsouth]

Hey mate, do you have the (idle control sensor)ics? If so is it/was it working? Be happy to take that of your hands abs the ecu if that's still availabke?t

[moonchook]

not sure, can you describe where I would locate it? don't have a workshop manual for this,

complete loom is still in the car, would prefer to sell ecu with loom.

[deepsouth]

the ICS lives under the throttle body, this video shows it.


Pm'd you about the loom and ECU

[moonchook]

updated first post

[xjokux]

Did your aircon work? If so is the compressor still available?

[moonchook]

yes aircon was icy cold, have the compressor here, $150 plus post.

[deepsouth]

bump for a top bloke, dunno if we can rep on here but moonchook has been awesome to deal with thanks heaps mate!

[Django]

Hmm, I do need a front screen, the owner before me left the wiper blades too long and scratched it. I wonder what the postage price for a front screen would be nowdays? What do you reckon chook?

Edited by Django, 11 October 2013 - 02:55 AM.

[moonchook]

not sure, would not even know how to pack a windscreen properly to be honest. I would imagine it would have to be between foam in a wooden frame/crate. If you know anyone in brisbane who is going to road trip down your way I would be able to drop off no worries.

[Django]

Yeah definitely too hard to post!