Jump to content

Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Photo

Wheel bearings

- - - - -
Started by yeeehah, Jul 24 2013 09:46 AM
wheel bearing evo 4 evo 1 bearings wheel

  • Please log in to reply
34 replies to this topic

#21
yeeehah
Posted 29 July 2013 - 10:24 AM

yeeehah

    Member

  • Active Members
  • PipPipPip
  • 149 posts
  • LocationCanberra
For those interested, i only ended up paying $120 for the front bearings, the brand is Koyo. The CBC sales dude was very helpful and explained how CBC go about their bearings. CBC also sell the Chinese made bearings for a lot cheaper, but they have had a few instances where they have failed. He did say over time, the Chinese made bearings will eventually be just as good in most applications.
My cars:
- Track prepped CD9A
- TH Magna 'Madna' wagon on bags (towing vehicle)
http://www.driveght.com.au

#22
leadfoot
Posted 29 July 2013 - 11:32 AM

leadfoot

    Moderator

  • Moderators
  • 3,429 posts
  • LocationGold Coast
exactly the same as i payed. add to that $60 for fitting and i was done

yes it's me KHUBNER

#23
GSR-747
Posted 31 July 2013 - 11:36 AM

GSR-747

    Underpowered Car

  • Active Members
  • PipPipPip
  • 1,753 posts
  • LocationMelbourne

For those interested, i only ended up paying $120 for the front bearings, the brand is Koyo. The CBC sales dude was very helpful and explained how CBC go about their bearings. CBC also sell the Chinese made bearings for a lot cheaper, but they have had a few instances where they have failed. He did say over time, the Chinese made bearings will eventually be just as good in most applications.

I'm interested in what the part numbers are of the bearings (KOYO) that you got, I just got given the wrong bearings from Bursons, would be much easier to get the right ones with a part number, seals part number also would be handy.

1977 RA28 Toyota Celica
1993 Lancer GSR


Problems are solved by concentrating on what is right not who is right.

#24
jack be nimble
Posted 31 July 2013 - 03:06 PM

jack be nimble

    master of none

  • Donating Members
  • PipPipPip
  • 8,301 posts
  • Locationperth sor. 20 mins from brians place
Nothing wrong with koyo
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.

#25
turbovr4
Posted 31 July 2013 - 07:17 PM

turbovr4

    Advanced Member

  • Active Members
  • PipPipPip
  • 239 posts
  • LocationAspley Qld
Koyo are fine and so are SKF and NTN and years ago you even got a bearing company called FAG(always a joke about that brand at my work). I work in industry and like everybody says there are different quality bearings but it also depends on your application of it. Haven't you guys already found that with uni joints as I have already discovered, I put 2 of a cheap "endurance" brand in a few years ago in the Eterna, and one shit itself in two years. Greased it till the grease oozed out but one cup got none. the better quality hardy spicer is fine and the hardy spicers on the MG have done over 120,000km with no issues.

Edited by turbovr4, 31 July 2013 - 07:18 PM.

#26
yeeehah
Posted 01 August 2013 - 12:31 AM

yeeehah

    Member

  • Active Members
  • PipPipPip
  • 149 posts
  • LocationCanberra

I'm interested in what the part numbers are of the bearings (KOYO) that you got, I just got given the wrong bearings from Bursons, would be much easier to get the right ones with a part number, seals part number also would be handy.



Here you go:

MC 112A - Front
MC 235 - Rear

fronts include the seals. You can also just call CBC with part numbers already quoted in this thread.
My cars:
- Track prepped CD9A
- TH Magna 'Madna' wagon on bags (towing vehicle)
http://www.driveght.com.au

#27
GSR-747
Posted 01 August 2013 - 09:49 AM

GSR-747

    Underpowered Car

  • Active Members
  • PipPipPip
  • 1,753 posts
  • LocationMelbourne
Thanks Yeeehah, So that is part numbers for KOYO brand? Bearing with two seals. They are meant to be getting me the right ones in tomorrow....

1977 RA28 Toyota Celica
1993 Lancer GSR


Problems are solved by concentrating on what is right not who is right.

#28
evo-gsr
Posted 01 August 2013 - 10:36 AM

evo-gsr

    Advanced Member

  • Active Members
  • PipPipPip
  • 10,379 posts
  • LocationBuddhist Temple NSW
Isnt that what you asked for in post #23....?
So im gonna take a punt and say yes thats the numbers you originally asked for :blink:
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]

#29
yeeehah
Posted 01 August 2013 - 10:02 PM

yeeehah

    Member

  • Active Members
  • PipPipPip
  • 149 posts
  • LocationCanberra

Thanks Yeeehah, So that is part numbers for KOYO brand? Bearing with two seals. They are meant to be getting me the right ones in tomorrow....


yes as per your request, i gave you CBC part numbers for their kit, which will contain Koyo bearings and seals. I don't have the actual koyo numbers for each bearing and seal.
My cars:
- Track prepped CD9A
- TH Magna 'Madna' wagon on bags (towing vehicle)
http://www.driveght.com.au

#30
Hypo
Posted 06 August 2013 - 08:20 AM

Hypo

    Advanced Member

  • Active Members
  • PipPipPip
  • 1,309 posts
  • LocationBrisbane
Does anyone know if this will fit the spline on my EVO II driveshafts?

MR403968

http://www.ebay.com....em=170732451752

#31
evo-gsr
Posted 06 August 2013 - 08:50 AM

evo-gsr

    Advanced Member

  • Active Members
  • PipPipPip
  • 10,379 posts
  • LocationBuddhist Temple NSW
I have Evo 7 rear hubs here which fit on my Evo's drive shafts. So I'm saying that they will.
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]

#32
DOUGMO
Posted 06 August 2013 - 09:58 AM

DOUGMO

    yoni lover

  • Active Members
  • PipPipPip
  • 8,885 posts
  • LocationMelbourne
yep, they will fit

GENUINE CE9A evo2 gsr track car
all fabrication BJP AUTOMOTIVE
winton 1:27.4 /// sandown 1:21.5 /// phillip island 1:49.2 /// haunted hills 59.1 /// eastern creek 1:35.4 /// winton short 1:01.4

#33
yeeehah
Posted 07 August 2013 - 11:25 AM

yeeehah

    Member

  • Active Members
  • PipPipPip
  • 149 posts
  • LocationCanberra
but to run that full hub assembly you must be running the later model knuckles and brembos, is that correct?
My cars:
- Track prepped CD9A
- TH Magna 'Madna' wagon on bags (towing vehicle)
http://www.driveght.com.au

#34
evo-gsr
Posted 07 August 2013 - 11:29 AM

evo-gsr

    Advanced Member

  • Active Members
  • PipPipPip
  • 10,379 posts
  • LocationBuddhist Temple NSW
Correct
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]

#35
ULS33
Posted 20 July 2015 - 10:55 AM

ULS33

    Member

  • Donating Members
  • PipPipPip
  • 226 posts
  • LocationBRISVEGAS (Brisbane)


Here you go:

MC 112A - Front
MC 235 - Rear

fronts include the seals. You can also just call CBC with part numbers already quoted in this thread.

Thanks for the part numbers mate.

 

I need to replace my front bearings too.

Rang CBC today. They quoted me on Front Bearing~MC 112A at $149+ ea. (seals incl'd) Rears~MC 235 at $96+ ea. (seals incl.)   ....to me that seems steep

I rang SKF bearings after that. They quoted me for the Front~AB6695 at $75+ ea. (Didn't get the rear sorry) But these are a GMB branded bearing. I asked him about the quality level as a comparison with their own SKF brand. He said that these are decent enough for my application and reassured me that they weren't crap, even for that price.

Has anybody else recently bought new bearings? (since this thread was started) If so, what price/ brand did you go with? Just curious, cheers


Back to Evolution 1-3, CC GSR Technical

Also tagged with one or more of these keywords: wheel bearing evo 4, evo 1, bearings wheel

3 user(s) are reading this topic

0 members, 3 guests, 0 anonymous users

  1. 4GTuner
  2. → 4G Powered Technical Discussion
  3. → Evolution 1-3, CC GSR Technical