5 replies to this topic

[forgeG63gsr]

hi, this is how my hot side is for the intercooler piping. what I want to do is rotating the td05 comp housing so it faces downward and get rid of that j pipe. I did some research, to do this you'll need to grind the dot that lines up the chra to the housing or you can drill a new hole. is there anything else I need to do? thank you

Attached Thumbnails

• 

[EVL20T]

You wont be able to run the stock wastegate actuator, it bolts on the comp housing and if u turn it then u will need to make custom brackets or run external gate

[leadfoot]

custom bracket can't be that hard would need to be a strong piece of steel plate shaped to fit but easily doable

[forgeG63gsr]

if that's the only other problem then this should be easy. thanks for the replies

[Rockabilly]

Get a WRX comp. It fits & faces down. I have one milled for a 20g wheel
As Mike said, needs a new bracket & a knotch as Jesse said


No boost controler needed

Cheers

Edited by Rockabilly, 12 September 2013 - 02:35 AM.

[ted]

I have rotated a tdo5 thats what i did i milled out a notch,rotated it and made a bracket for the actuator was pretty straight forward