121 replies to this topic

[Geo&Kez]

It's all done thanks Jamo. Got a whole lot of stuff off Evan last week. I just figured I'd post it up if people didn't know. As usual, I'm probably a few years late.

[evo-gsr]

All you needed to do was ask...

[Missile]

Are there OEM mount inserts available?

I can find them on CAPS?

[evo-gsr]

Meek have / had them Tim so they must be available.

[Missile]

The have aftermarket ones... still a good lead.

[TBOWGN]

Hey guys, just had a read of this whole thread... Still looks like a bit of confusion with what fits what...  Ive just made up some polyurethane ones for my RVR, and should be a few weeks away from having a full set of VR4 ones getting made.  

 

If anyone is prepared to send me their full set of gsr/evo 1-3 mounts then i can make them up for anyone who wants them too.  

 

Here are the ones on ebay i just put up:

http://www.ebay.com....=item2ed8de8745

http://www.ebay.com....=item2ed8de86d6

 

They are $45 per mount for 4G members

 

And this is what they look like in my RVR.... (Left and right RVR ones are still in production)

how to print screen on pc

 

Sorry to do a full sales pitch, but it seems like this may solve a few overseas sourcing issues.

 

Cheers, Lars

[leadfoot]

will you do me a set of front/rear gsr ones? i've got a pair of dead mounts to give you. i'm also local so that save on shipping

[TBOWGN]

I want a set, but cant measure mine as yet.
$90 is pretty much full price for 2 rollstops tho, isnt it?
Im not feeling the love.....

Yeah its not cheap to get them done on such a small scale tho Jack... I got some made for mine because they were so hard to source, got some spares for the rvr boys and now i can do the same for you guys. Once i get some bigger orders i might be able to drop the price, but at this stage it is what it is.  Its still cheaper to do it this way for our RVR's as normally to get an OEM replacement they range from $85 - $170 per mount

[leadfoot]

i've gpt a pu center wich  cost like $50 not including anything req to install them

[Evo-00x]

GALANT VR4 OWNERS

Finally updated Galant VR4 Prothane insert part numbers on the first page: http://www.4gtuner.c...ounts/?p=285620

NO more confusion

[Cranked]

Check out summit racing.

[TBOWGN]

Looks like ill have a whole bunch of front and rear PU sets ready by the end of the week thanks to Khubner1's GSR.... I've been told they will also fit evo 1-3's but im still yet to 100% confirm this.

[TBOWGN]

Okay, they're ready!  Ive now got front and rear EVO 1-3 and gsr engine mounts PU inserts. These should also fit Jumbuck and Satria

 

hosting image

 

Hit me up if you want a set: 0422878114

 

$45 per mount (plus $5 postage) for 4gtuner members. Pickup available from the Gold Coast.

 

 

EVO 1-3 GSR dimensions are:

 

Rear engine mount

 

Width:41mm

Inside Diameter: 66mm

Inside Circumference: 210mm (approx)

Crush tube length: 56mm

Cruch tube diameter: 17mm

 

Front engine mount

 

Width: 38mm

Inside Diameter: 76mm

Inside Circumference: 240mm (approx)

Crush tube length: 51mm

Crush tube diameter: 22mm

 

Edited by TBOWGN, 03 December 2014 - 11:29 AM.

[evo-gsr]

A price might help sell a few.....

[leadfoot]

these are mighty solid and feel very good quality. i'll have them installed probably tomorrow afternoon. i'm looking forward to having an engine that doesn't rock back and forth as much

[Evo-00x]

TBOWGN, how come your dimensions for the front insert is smaller than the rear one?

Actually your dimensions are pretty different to those listed on the first page for a GSR/EVO.

Are yours actually RVR specific?

[TBOWGN]

TBOWGN, how come your dimensions for the front insert is smaller than the rear one?

Actually your dimensions are pretty different to those listed on the first page for a GSR/EVO.

Are yours actually RVR specific?

 

My bad, i had them listed around the wrong way... 

Ill double check my dimensions then.

And no, these ones have been moulded specifically from a gsr.... (Khubner1's gsr actually, thanks Kyle)

[leadfoot]

made directly from my engine mounts rob

[Evo-00x]

Ah OK. Yeah if the front and back have been listed by TBOWGN the wrong way around, then that makes sense. He has since edited it

Your measurements are 4mm smaller diameter than the ones listed on the front page from Prothane. But those Prothane inserts you practically need a vice to squeeze them in lol

[TBOWGN]

Yeah they're tight but you can still put it in by hand...

 

Im still after some east/west evo/gsr mounts if anyone has any lying around? Ill sort them out like i did with Khubner1