220 replies to this topic

[Matthias]

And the front bar I have cut down for more clearance to fit the aircooler. Or what do you mean?

[Matthias]

here are some pics from the aircooler fit into the car with new build air pipes . hope you like it ;-)

 

 

 

 

[EV0300]

very nice work mate, wish i had the experience with the welder...

[Miniman_alis]

And the front bar I have cut down for more clearance to fit the aircooler. Or what do you mean?

 

the top of the bar with all the pop rivets it looks like, also the side pod holes are hacked to shit?

[Matthias]

ah ok. now im understand.you mean the frontbumper with the pop rivets.

the top of the frontbumper are cutted colt bumper.

and the lower part are a evo 2 bumper.

popped together and closed the side mouldings. but the pictures are the unfinished frontbumper.

why did i do that?

i dont like the complete evo look at the colt.the stock evo bumper is 10cm longer as the colt bumper

that does not fit symmetrically to the short tail

[Matthias]

soon the pictures will come where I completely finished build the bumper.

[Matthias]

some other smal works was to do

 

 

Oil pressure

Fuel pressure

Boost

Engine oil temp.

Gearbox oil temp.

AFR

Exhaust temp.

 

 

inspection from the reardiff

all was ok :-)

 

 

 

 

[Evo-00x]

Looks like the rear diff just gave birth to all those parts lol

[jack be nimble]

ah ok. now im understand.you mean the frontbumper with the pop rivets.
the top of the frontbumper are cutted colt bumper.
and the lower part are a evo 2 bumper.
popped together and closed the side mouldings. but the pictures are the unfinished frontbumper.
why did i do that?
i dont like the complete evo look at the colt.the stock evo bumper is 10cm longer as the colt bumper
that does not fit symmetrically to the short tail

Agree^
This is the work of a genius. I like the headlights of the colt/coupe and the evo 1/2 front bar. Blending them together is awesome.
It will look fine when finished off.

[Matthias]

here are some bodywork, also the frontbumper

 

 

 

 

 

and a new airhole for the aircooler

 

 

and fitted on the car

 

 

complete body build ready for the paintshop

 

 

 

 

 

[Matthias]

complete shell was grounded and ready for final paintjob

 

 

 

 

 

 

thats the new colour for the car

 

[Matthias]

and here with the new colour

 

 

 

 

 

 

 

 

 

and ready to ake it home

 

[Geo&Kez]

Porno!

[Matthias]

new clutch setup for the build

quater master v-drive hd with race flywheel

 

 

 

[Matthias]

and build the engine loom for the 1995 eclipse ecu with ecm-link

 

 

 

 

[Evo-00x]

Die meisten der Fotos sind unscharf. Sie benötigen eine neue Kamera (lacht)

[EVL20T]

er kann eine gute Kamera nicht leisten, wird all sein Geld auf dem Auto verbracht

[croket]

Just goes to show wanky fuel rails and intake plenums arnt needed to make big power !!!

[Matthias]

sorry guys i have no good camera :-D

i have make the pics with my smartphone

 

@croket

the stock fuelrail is big enough to hit 1000hp

and the stock evo intake manifold is also good designed for that levels. i have hit last year the 900hp also with stock throttlebody

 

here are another big hp evo with stock manifold

HKS Hypermax

 

http://www.fullboost...000hp-EVO/page2

[jack be nimble]

Just goes to show wanky fuel rails and intake plenums arnt needed to make big power !!!

Coils too. I knew they were tough