Jump to content

Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Photo

CC GSR for sale VIC

- - - - -

  • Please log in to reply
8 replies to this topic

#1
oggy

oggy

    Member

  • Active Members
  • PipPipPip
  • 108 posts
  • LocationMildura, VIC

SOLD

 

 

 

 

 

G'day everyone,
Looking to sell my GSR and spares I have for it. I'll try and be as thorough as possible in this thread so there are no suprises for anyone who is interested.  

1995 Mitsubishi Lancer GSR
4g93 turbo
200,789kms
TD05-14b from galant vr4
ported exhaust manifold outlet to match turbo
2.5 inch exhaust from dump back, highflow cat, cannon muffler
FMIC behind standard bumper. can't remember what size, but painted black so stealth as haha.
xtreme DSBMS clutch kit (solid button with sprung centre and motorsport pressure plate).  
Brand new battery
Brand new clutch master and slave
standard evo springs and shocks all round
DVD player with screen, a couple of amps and 2 x 12" subs
Current VIC rego - Expires in november, not sure if i'm going to renue it or not.


PRICE: $3500 ono. no RWC.

Spares/extras that come with the car:
genuine mitsubishi head gasket still in packet
microtech LT-10s with loom and hand controller to suit 4g93
evo twin squirt injectors (550cc?)
3 inch metal intake pipe to suit speed density setup
spare gearbox, transfer case and front driveshafts
vr4? factory oil cooler and lines
Ultra racing fender bars
Ultra racing 3 point strut brace (connects to firewall aswell as towers)

condition comments:
Body is ok overall, nothing major but a fair few small things: front gaurds are a bit out of shape, few small dings and scratches, tint is old and purple and turret strips are crudely silconed on. The front bumper had to be trimmed to the shithouse to fit the cooler, it was done pretty roughly :(. Bumper has also had a scrape and just had some "close-ish" paint put over the scrape so it's not dead obvious.
Car looks ok and would probably come up half decent with a good cut and polish, but if you have a good look over it, it's pretty average haha!

Interior is in ok condition overall. Could use a good clean. Back seat has a few rips in it.

has aftermarket cruise control, but the cable isn't hooked up and looks like it's rooted. all the electronics are there and look ok though, so might be a fairly easy fix.

Aircon needs re-gassing, and the fan speed only works on the highest 2 settings.

Audio system sucks. The player doesn't like playing burnt discs, so have to use genuines. The rear speakers are blown so are disconnected and the subs are ordinary.

Intercooler piping is crap. I made it in a weekend using a combination of spare tubing, stock piping and piping from another kit. works well, but it's the worst job i've done and I'm not happy with it lol.
Intercooler mounts are pretty lame too. They work, but better ones could be made. Basically I had limited tools and time to fit the intercooler so I just made it work and it's stayed like that since with no dramas (over a year).  

Because of how heavy the clutch is in it I ran into the infamous clutch master firewall crack. Wish I knew about this before I put the clutch in!
It didn't crack too bad, from the pushrod hole up a little bit past one of the stud holes.
The crack hasn't been welded up, but a flat plate has been welded to the pedal box and another plate is bolted between the firewall and master cylinder. So far it has worked like a charm.  



 


Edited by oggy, 01 December 2013 - 11:47 AM.


#2
oggy

oggy

    Member

  • Active Members
  • PipPipPip
  • 108 posts
  • LocationMildura, VIC

also better add car is located in mildura, vic. And willing to trade for 4wd/4wd ute with cash adjust either way as needed.



#3
jack be nimble

jack be nimble

    master of none

  • Donating Members
  • PipPipPip
  • 8,301 posts
  • Locationperth sor. 20 mins from brians place
Intercooler piping from square tubing... pmsl.
I thought I was dodge
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.

#4
evo-gsr

evo-gsr

    Advanced Member

  • Active Members
  • PipPipPip
  • 10,379 posts
  • LocationBuddhist Temple NSW

Spare tubing jack!

 

Not square, like your eyes, from reading forums all night  :o


[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]

#5
oggy

oggy

    Member

  • Active Members
  • PipPipPip
  • 108 posts
  • LocationMildura, VIC

hahaha, yeah definately not square tubing! :lol:

 

I've also had a few enquiries about seperating parts.... At this stage I'm not willing to seperate anything unless somebody wants to buy the car but not the parts. As I said in the for sale post, if it doesn't sell quickly i'll just keep plugging away at it - I'm curious to see what it goes like once the ECU is in and it gets a bit more boost and a tune! :D


Edited by oggy, 29 October 2013 - 10:37 PM.


#6
jack be nimble

jack be nimble

    master of none

  • Donating Members
  • PipPipPip
  • 8,301 posts
  • Locationperth sor. 20 mins from brians place
Must keep away from the daytura. Messes my eyes up...
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.

#7
oggy

oggy

    Member

  • Active Members
  • PipPipPip
  • 108 posts
  • LocationMildura, VIC

Deposit taken.

However if sale falls through and any melb people are interested I'll be in melbourne with the car and all the parts weekend of 23rd



#8
oggy

oggy

    Member

  • Active Members
  • PipPipPip
  • 108 posts
  • LocationMildura, VIC

This weekend special for melb people - $2900. Car and all parts are in melb ready to go until sunday 24th. Car has had 12 months rego just put on it also, so rego'd until 19 november 2014!



#9
oggy

oggy

    Member

  • Active Members
  • PipPipPip
  • 108 posts
  • LocationMildura, VIC

SOLD :D




2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users