21 replies to this topic

[clone]

okay im trying to replace the weather strips ( the ones that run from the front windscreen to the rear )
ive got all new clips and im wondering how they correctly fit back in . 
 
also does the rear windscreen garnish metal thing go below the strips or above
 
any information is very much appricated

[leadfoot]

rear windsreen garnish goes under neath.

 

theres 8 clips that go under the windscreen glass. and 6 that connect to the rain gutter lugs.

 

the lug clips are more square and have a springy inner that clips over the lug

 

the window clips have a tag off to one side that slips under the glass

[clone]

okay the red clips "square" ones go onto the body of the vehicle
 
ive got black ones that go in the strip with the square end towards to body. then ive got pink , blue

[evo-gsr]

Blue ones have legs that go under the front windscreen. Then the mold clips onto them.

[evo-gsr]

 

Either of these go under the glass then mold clips to them

[evo-gsr]

These clip  along the edge of window and to the mold also.

Edited by evo-gsr, 28 November 2013 - 07:31 PM.

[GSR 95T]

Hmmm. Think you boys have that back the front.

Red ones go down the windows front and rear. Others go along the roof....

[evo-gsr]

The red ones do go along the windows your right there...my mistake.

But the blue / purple ones definitely go under the edge of the windscreen mate

[Lemsta2]

What are the part numbers for the strips and the different clips?

Wouldn't mind ordering a new set for my car via http://www.amayama.com/

[kessen]

I would appreciate the P/N for the stuff needed to change the rear window bottom weather strip too. Mine's flakey and horrible.

 

Also, would anyone happen to have the P/Ns for the plastic diffuser, little rubber strip and trim clips that goes under the front windshield? 

[evopwr]

FYI proton wira are the same and cost significantly less. Have a search on the forums, has been discussed

[evo-gsr]

Many times.

[clone]

okay i tried again this weekend to do this and still no luck ,

ive got all the read clips on the body and the actual strip i have the blue ones at the front and pink at the bank as well as the black ones "5" of them on the top. The back window clicks into place just fine!
but the top and front windscreen still wont click or hold, im really tempted just to fucking sikaflex these fuckers on as its really annoying me . Someone must have found out the correct procedure to replace these

[leadfoot]

start with the top! by putting one edge over and then curling down over the other side

[Lemsta2]

Does anyone know the part number for these clips? 

I've got the black weather strips and the blue & purple clips but don't have the red ones (it never came with them when I bought it )

 

[jack be nimble]

They are very common clips. A panel shop or windscreen shop should have some

[Lemsta2]

They are very common clips. A panel shop or windscreen shop should have some

 

Damn, I already ordered 12 from Mitsubishi...$60

 

I still have no idea how the red ones attach to the purple/blue clips. I'll ask my mechanic to fit them during next service.

[evo-gsr]

They dont attatch to the purple / blue clips. They attatch to the pins that are on the body of the car. 

When the strip is removed you will see what I mean.

[Lemsta2]

They dont attatch to the purple / blue clips. They attatch to the pins that are on the body of the car. 

When the strip is removed you will see what I mean.

 

Yep, I get that, the red clip attaches to the pin (it looks like a head of a nail not full hammered in) on the body. But then how do the purple/blue clips attach to the body? 

So what is the purpose of the red clips then? 

I test fitted the new weather strip on and was able to put the top and back part of it (don't ask me how I did the back, I just pushed it down, heard 3 clicks and it was secured). The front ones don't click and don't hold the front part of the weather strip in place.

[clone]

make sure you dont have the window glue all the way to the edge of the glass or the clips wont have enough room to clip under it . i trimmed all the clue since i had new rear and front windows put in and to much glue was my problem.