Hey guys, chasing the engine mount for my Rvr n23w closest to the fire wall.
Does anyone know the part no? And where to get one from?
Cheers, Lars
Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
#1
Posted 04 March 2014 - 12:00 AM
TBOWGN
-
- Active Members
-
- 693 posts
Advanced Member
- LocationGold Coast
Back to top
#2
Posted 04 March 2014 - 12:42 AM
MrConsistent
-
- Active Members
-
- 155 posts
Advanced Member
- LocationCanberra
I used the "Ralliart" one from a evo3 which is the same as the cc lancer, worst case measure the diameter and get them to check ...that is if they have the measurements on the system....
Understeer is when you hit the wall with the front of the car and oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall, torque is how far you take the wall with you.
#3
Posted 04 March 2014 - 12:43 AM
MrConsistent
-
- Active Members
-
- 155 posts
Advanced Member
- LocationCanberra
And were you talking to Brent from "I Dyno" ?
Understeer is when you hit the wall with the front of the car and oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall, torque is how far you take the wall with you.
#4
Posted 04 March 2014 - 01:02 AM
TBOWGN
-
- Active Members
-
- 693 posts
Advanced Member
- LocationGold Coast
#5
Posted 04 March 2014 - 06:18 AM
Rockabilly
-
- Active Members
-
- 874 posts
Advanced Member
- LocationSydney
#6
Posted 10 March 2014 - 09:17 AM
moonchook
-
- Members
-
- 72 posts
Advanced Member
- LocationMt Gravatt Brisbane
hit me up if you want a used one, though new would probably be better peace of mind cos its not something you want to replace more than once!
#7
Posted 21 March 2014 - 05:56 AM
penngwyne
-
- Active Members
-
- 356 posts
Advanced Member
- LocationNaracoorte SA
From Mitsubishi ASA
MR171914 BRACKET,ENGINE ROLL STOPPER, LEFT HAND
From Amayama Trading
AUD Days Delay From
Mitsubishi MR171914 MOUNTING $ 92.68 20 - 30 UAE Delays possible: 35%
Mitsubishi MR171914 MOUNTING $ 107.85 10 Japan Delays possible: 5%
This part does N23W & N23WG
Although to be dead certain your chassis number is needed
Edited by penngwyne, 21 March 2014 - 06:01 AM.
Still love the RVR but am paranoid about little noises
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
