Advanced Member
Hey guys.
I'm in the market for a new radiator.
I was looking at the ones on E bay, there very cheap but has anyone used one?
As the cars use is full competition I would hate to reduce the cooling.
So just seeing if anyone has had any prior experience with one.
yoni lover
GENUINE CE9A evo2 gsr track car
all fabrication BJP AUTOMOTIVE
winton 1:27.4 /// sandown 1:21.5 /// phillip island 1:49.2 /// haunted hills 59.1 /// eastern creek 1:35.4 /// winton short 1:01.4
Advanced Member
Have an ASI one in my coupe, has been great for the price of it!
4G63t Satria. Should be good.... ish.
Grumpy old man from the school of hard knocks
to get a proper idea of cooling difference....ask for
core thickness....not just header plate width
how many fins per inch and are they louvred
how many tubes on core and rows staggered or in line
then compare to the one you have...or had.
A few extra tubes and staggered is good....less fins per inch is bad....fin design is important but if there is 2 or three extra per inch not critcal to have louvre
BRIAN
Black evo 1 full road rego and done properly/legally
I have heaps of parts...but never the one I need.
Member
I had a chinese one, And couldnt get a radiator cap to fit. Which caused me to do my head gasket. Well I reckon it did it.
So I bought a Koyo radiator for $750. Nice and thick. And new head gasket. hahah.
Advanced Member
Yeah ok, I may go something a bit better, may look at getting a plain PWR core and making my own end tanks to suite my Laminova oil cooler (which runs of coolant)
[DIY]
^ may cost more than purchasing a Koyo and having some additional inlets/outlets welded?
0 members, 1 guests, 0 anonymous users
Back to top