Has anyone used these before, and can they elaborate on their installation? Just having a moment or 2 trying to work out exactly how they're supposed to be installed. Maybe I'm just tired, and not thinking straight.
Thanks in advance.
Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
#1
Posted 27 October 2014 - 01:06 PM
Lister
-
- Active Members
-
- 453 posts
Advanced Member
- LocationHobart
Back to top
#2
Posted 27 October 2014 - 02:54 PM
EVL20T
-
- Donating Members
-
- 5,197 posts
AWD 4G63T POWAH!
- LocationNewcastle
Sent you some pics
I installed them on a mates car and also removed them to install full racefab rear arms lol
Edited by EVL20T, 27 October 2014 - 02:54 PM.
------------ 4GTUNER STICKERS - CLICK HERE ------------
------------------------- 4G63T AWD COUPE -------------------------
----------------------- WWW.EVOCOUPE.NET -----------------------
------------------------- 4G63T AWD COUPE -------------------------
----------------------- WWW.EVOCOUPE.NET -----------------------
#3
Posted 27 October 2014 - 08:09 PM
clone
-
- Active Members
-
- 1,075 posts
self employed bum
- LocationTownsville
#4
Posted 27 October 2014 - 09:04 PM
Lister
-
- Active Members
-
- 453 posts
Advanced Member
- LocationHobart
Yeah thanks Mikey, I was just looking at them with tired eyes this morning its obvious hahahaha. You should have told me I would have bought the entire arm assembly lol.
#5
Posted 07 November 2014 - 10:57 AM
EVO193
-
- Donating Members
-
- 140 posts
Advanced Member
- LocationNewcastle NSW
I have a set on my evo 1
Evo 4 5 6 7 8 9 rear handbrake assembly bolts right onto the adaptors but I used 2 x evo 6 passenger side handbrake cables as the evo 6 drivers side cable was too short.
Using the evo 6 assembly I had to die grind the hub hole out of the H/brake assembly to go over the evo 1 bearing hub and cut down the large stud and nut that comes off the rear of the HB assembly as it interferes with the rear of the evo 1 training arm. You might also have to elongate the 4 x mounting holes in the HB assembly that bolts it to the trailing arm as if I remember correctly have a different pcd. I spent about 4 hours fitting them and I installed new bearings and went 5 stud.
Hope this helps
I just sold a complete assembly with this already completed with brakes and meek cast adaptors.
- CLuTZ likes this
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
