Sticky this please 
1989-1992 GVR4
PROTHANE ENGINE MOUNTS
Thanks to Wade (VR42LT) who volunteered to put up with my shit asking him to measure the dimensions of his GVR4 engine mounts.
I've matched them up to part numbers in the Prothane range.
Remember, if you want black coloured inserts, then the part number has a "B" after it. 
SEE ALSO ATTACHED PIC OF GVR4 MOUNT IDENTIFICATION
1. Front Roller Stopper (the mount in between the radiator and the engine block)
Confirmed this mount to have a 70mm inner diameter with a 40mm inner thickness.
The part number for this is a 13-506
2. Top Engine Mount insert (the big engine mount next to the timing belt cover)
Confirmed this mount to have a 90mm inner diameter with a 50mm inner thickness.
The part number for this is a 13-503
3. Rear Gearbox Mount (the mount at the back of the gearbox against the chassis rail)
Confirmed this mount to have a 80mm inner diameter with a 50mm inner thickness.
The part number for this is a 13-501
4. Rear Roller Stopper (the mount nearest to the firewall under the intake manifold)
I have confirmed this mount to have a 70mm inner diameter with a 40mm inner thickness.
The part number for this is a 13-506
Attached Thumbnails
Edited by EVO-00X, 04 November 2014 - 12:56 PM.
Back to top
