14 replies to this topic

[rhodieee]

Hey guys! so my gearbox has pretty much shat itself and now grinds when ever I change gears, thinking of reconditioning the gearbox and just pretty much getting new selector sleeves, synchro and hub assemblys. Or theres the second option which is buy my mates second hand gearbox which is from an Hyper sports gear with approx 120xxx KM for $500 and getting a mechanic to install it for me. which i also have to pay the labour for. What would be the cheaper and better option? and also i have just a sports gear model and not the hyper sports gear. Will the gearbox just bolt on or not? much help will be appreciated! thanks guys

[jack be nimble]

You will struggle to get the basic bearings, seals and synchroes for $500 in parts alone. Still gotta pay to rnr gearbox and replace bits as wwll

[BMGTZ]

best check the  diff ratio of what you have and the one you are considering. it is on the plate pn the firewall. It will say 3.909 or 3.545.

 

if they are the same then good..... But also run a google search of the two using the W5M33 2 ???? number stamped on the bellhousing of both boxes in case some one has changed the box at some time. The next thing to check is the transfer case ratio as Ive seen a couple of the RVR using an evo 3 transfer case.

[White Knight]

Hsgr runs the 3.909 and the Ssg has the 3.54...... Sorry dude.
Where are you located?

[rhodieee]

Hsgr runs the 3.909 and the Ssg has the 3.54...... Sorry dude.
Where are you located?

gold coast bro... whys tht?

[White Knight]

Always on the lookout for a spare gearbox mate. Just like you I guess...
Someone will cone to the rescue buddy, they always do. Tim from brisbane rebuilds gearboxes for fun. Hopefully he will see the post and come to your rescue or someone will have a spare floating around for sale.
Best of luck my friend.

[Super Top]

I'm still in need of a gearbox for my HSGR.

Too bad Australia is so far away from here and gearboxes are heavy.

 

I'm trying to get a Evo3 UPGE gearbox. But that's also a struggle.

[White Knight]

I feel for you mate, I really do.....

[jack be nimble]

Mathias lives pretty close by, dont feel too bad

[MDK87]

Always on the lookout for a spare gearbox mate. Just like you I guess...

 

I coulda swore I called you about that one going for $250 my mate had.

He ended up selling the whole car for $500!

[BYBY5L]

Seen 2 in w.a on gumtree, notchy 2nd in 1 unknown cond other but 300 bux each,
even for any of the w.a boys might wanna check it out.

edit: actually galant boxes, still cheap, find em here

http://www.gumtree.c...n-up/1086118271

Edited by BYBY5L, 12 August 2015 - 01:19 AM.

[Evo-00x]

notchy 2nd would most probably be the 1st/2nd hub and slider (hub and sleeve) which teeth get chipped over time when people miss-shift from 1st into 2nd and grind them away.  

You can buy brand new ones through TMZ in America or perhaps even give Amayama a try.

Part number is MD749414 and should be about $140US.

Else you can probably pick up a good one from another broken gearbox. RVR, GSR, EVO I-III all use the same part number hub and sleeve for 1st/2nd gear. 

[White Knight]

I coulda swore I called you about that one going for $250 my mate had.
He ended up selling the whole car for $500!

I think you got on to me about the Haltech Mo. All good.

[MDK87]

Ahh it must've been Lars or Ben. It was actually the same guy with the Haltech haha
To rub salt in the wound, he sold that PS1000 with patch loom and GTX28 for 1200! 

Edited by MDK87, 12 August 2015 - 11:28 PM.

[White Knight]

Stop it.....