Hi guys, just after some clarification on what rim width/ offset fit under the E5/6. As far as I understand, if I stick with 17" I can go as wide 9.5" with an offset of anywhere between +20 to +35 with no guard mods correct?
Now 18" I've had mixed opinions. Can I go 9.5" with a low offset say +20 or do I have to mod the guards regardless of offset if I want to go 9.5"?
And what exactly is involved in modifying the rear guards of a e5/6?
Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
#1
Posted 22 March 2015 - 10:42 PM
something_wild
-
- Active Members
-
- 209 posts
Advanced Member
- LocationMelbourne
Back to top
#2
Posted 22 March 2015 - 11:20 PM
TMAK
-
- Active Members
-
- 1,301 posts
Formerly known as FRONTN
- LocationHillside, Victoria
All the sizes above fit on a CP9A.
Fronts are usually fine, the issue is when you go lower in the rear. The rear has the plastic arch which can easily be trimmed to suit +20 offset on a 9.5" wheel.
BUT if you look behind the arch, there is a "double" lip. This would be where your tyres would hit. I've seen people completely remove this.
So... Many factors, you may be fine with a decent ride height, too low you may need stiffer springs or settings on dampers etc...
TMAK - JDM Evo 6.5 TME White with stripes - burnzytuned
|MAP shortblock 2.4LR 10.5:1CR|MAP EF3|GSC S2|Ohlins coilovers|Cusco|Endless|Meek|Turbosmart|Spoolin Up|Bosch 2000|Walbro 400|Zeitronix|GM|Kumho|Stock ported intake and exhaust manifolds|
366kws (vdr) @ 2.1bar
Old setup: 280kws (vdr) @ 24psi [email protected]
Previously owned the FRONTN Cordia.
|MAP shortblock 2.4LR 10.5:1CR|MAP EF3|GSC S2|Ohlins coilovers|Cusco|Endless|Meek|Turbosmart|Spoolin Up|Bosch 2000|Walbro 400|Zeitronix|GM|Kumho|Stock ported intake and exhaust manifolds|
366kws (vdr) @ 2.1bar
Old setup: 280kws (vdr) @ 24psi [email protected]
Previously owned the FRONTN Cordia.
#3
Posted 22 March 2015 - 11:35 PM
something_wild
-
- Active Members
-
- 209 posts
Advanced Member
- LocationMelbourne
Ah ok cheers TMAK! I am running BC coil overs, so I guess I could adjust the height to suit the setup?
Don't know about completely removing the inner arch lip...seems a bit extreme.
Alternatively, playing it very safe but still filling out the guards I could go 9" with similar offsets which would clear no probs yes?
Don't know about completely removing the inner arch lip...seems a bit extreme.
Alternatively, playing it very safe but still filling out the guards I could go 9" with similar offsets which would clear no probs yes?
#4
Posted 23 March 2015 - 08:54 AM
EVL20T
-
- Donating Members
-
- 5,197 posts
AWD 4G63T POWAH!
- LocationNewcastle
------------ 4GTUNER STICKERS - CLICK HERE ------------
------------------------- 4G63T AWD COUPE -------------------------
----------------------- WWW.EVOCOUPE.NET -----------------------
------------------------- 4G63T AWD COUPE -------------------------
----------------------- WWW.EVOCOUPE.NET -----------------------
#5
Posted 23 March 2015 - 11:49 AM
something_wild
-
- Active Members
-
- 209 posts
Advanced Member
- LocationMelbourne
EVL20t so is that a screw off piece or did you have to hack at it with a flat head? And once you put the flare back on, it looks exactly the same? Structurally the same?
Looking at some 10" +25 that I'd love lol. How would 10" go all round? I'm guessing a fair bit of poke....?
Looking at some 10" +25 that I'd love lol. How would 10" go all round? I'm guessing a fair bit of poke....?
Edited by something_wild, 23 March 2015 - 11:52 AM.
#6
Posted 23 March 2015 - 10:13 PM
evo-gsr
-
- Active Members
-
- 10,379 posts
Advanced Member
- LocationBuddhist Temple NSW
Hack it with a screwdriver? Jesus man....butcher much??
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]
Trust in the master of taxis.... He will set you straight[/quote]
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
