25 replies to this topic

[L300 Turbo]

Hey All

 

Had a few hours with big bird over the weekend, Started to tidy up the wiring as well as snooping around to see what else i could find hiding in there, i found a R32 Nissan throttle and  a XSPOWER  t3/t4 turbo didn't look much further for now, any way when i get some FREE time i will have a crack and get this thing running

Attached Thumbnails

• 
• 
• 

[L300 Turbo]

Hey All 

 

Its been a while since I've had a chance to work on this project but with some unwanted time off work I've been having a crack.  I did pull it down and did replace all gaskets. Inspected pistons rings bearings end float all this shit with that done  it's  back together and in the van. I took out the Microtech ecu and replaced it with a Haltech 750 and a Tech Edge Wideband controller so i can run E85 down the track.

Its been a slow process due to funds but it's finally nearly ready to crank over i do have a few little things to sort out such as aircon, intercooler, BOV,  Oil cooler, Air temp sensor all part of the fun.

   

Will keep you posted as i get things done 

Cheers Matt 

[bazeng]

Big bird. Nice name.!

[evo-gsr]

Cant wait to see the skid vids!!

[BYBY5L]

[L300 Turbo]

Managed to get a few more hours in got the Rad and fans in A/C condenser and the inter-cooler all jammed in one spot even got the blow off valve tucked away nicely a few more pipes on the inter-cooler and plumb up blow off valve and external wastegate oil water and fuel and she's a goer

I downloaded the base maps i need for the Haltech so it should start once timing is set fingers crossed