Does anyone know where to find an rvr centre bearing bracket that the tail shaft runs through?
See pic attached.
Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
#1
Posted 23 April 2015 - 03:00 AM
TBOWGN
-
- Active Members
-
- 693 posts
Advanced Member
- LocationGold Coast
Back to top
#2
Posted 23 April 2015 - 04:32 AM
evo-gsr
-
- Active Members
-
- 10,379 posts
Advanced Member
- LocationBuddhist Temple NSW
Cant see the pic.
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]
Trust in the master of taxis.... He will set you straight[/quote]
#3
Posted 24 April 2015 - 08:59 AM
Ross Cox
-
- Active Members
-
- 338 posts
Advanced Member
- LocationBrisbane...Northside
#4
Posted 24 April 2015 - 09:13 AM
p055um5
-
- Active Members
-
- 215 posts
Advanced Member
- LocationHunter Valley
- TBOWGN likes this
97 RVR HSG, ACL RACE SERIES FORGED PISTONS, EAGLE 3D H-BEAM FORGED RODS, ACL RACE SERIES BIG END / ROD BEARINGS, ACL RACE SERIES MAIN BEARINGS, ARP MIAN STUDS, Walbro GSS342 Fuel Pump, Siemens 870cc/min Injector, HALTECH E8 ECU
#5
Posted 24 April 2015 - 09:45 AM
MrConsistent
-
- Active Members
-
- 155 posts
Advanced Member
- LocationCanberra
^^^^as above ^^^ bought mine a few weeks ago and still to fit but measurements are exactly the same they said it was for a hg galant i believe 
Understeer is when you hit the wall with the front of the car and oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall, torque is how far you take the wall with you.
#6
Posted 24 April 2015 - 10:38 AM
TBOWGN
-
- Active Members
-
- 693 posts
Advanced Member
- LocationGold Coast
#7
Posted 24 April 2015 - 10:42 AM
TBOWGN
-
- Active Members
-
- 693 posts
Advanced Member
- LocationGold Coast
Cant see the pic.
Sorry man, was a bit hard on my phone....
Black and White RVR Hypergear
#8
Posted 24 April 2015 - 10:43 PM
p055um5
-
- Active Members
-
- 215 posts
Advanced Member
- LocationHunter Valley
Don't remember price but I do remember thinking cheep.
Also before pulling shaft apart mark it so you don't put it back together wrong and get an out of balance.
97 RVR HSG, ACL RACE SERIES FORGED PISTONS, EAGLE 3D H-BEAM FORGED RODS, ACL RACE SERIES BIG END / ROD BEARINGS, ACL RACE SERIES MAIN BEARINGS, ARP MIAN STUDS, Walbro GSS342 Fuel Pump, Siemens 870cc/min Injector, HALTECH E8 ECU
#9
Posted 25 April 2015 - 08:26 AM
TBOWGN
-
- Active Members
-
- 693 posts
Advanced Member
- LocationGold Coast
#10
Posted 28 July 2015 - 12:12 AM
60dsp
-
- Donating Members
-
- 40 posts
Member
- LocationBrisvegas
RVR HSG...
#11
Posted 29 July 2015 - 07:01 AM
TBOWGN
-
- Active Members
-
- 693 posts
Advanced Member
- LocationGold Coast
#12
Posted 29 July 2015 - 12:13 PM
MrConsistent
-
- Active Members
-
- 155 posts
Advanced Member
- LocationCanberra
Been sending messages to these guys for other stuff and even phoned the australian contact number two weeks several time still no response ......
Understeer is when you hit the wall with the front of the car and oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall, torque is how far you take the wall with you.
#13
Posted 30 July 2015 - 09:23 AM
TBOWGN
-
- Active Members
-
- 693 posts
Advanced Member
- LocationGold Coast
I bought some gear off them, came from overseas im assuming
Black and White RVR Hypergear
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
