Jump to content

Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Photo

gsr lancer manual to auto conversion

- - - - -
Started by jetevo3, Jun 23 2015 12:08 PM

  • Please log in to reply
34 replies to this topic

#1
jetevo3
Posted 23 June 2015 - 12:08 PM

jetevo3

    Member

  • Members
  • PipPip
  • 12 posts
  • Locationmelbourne, victoria
Hi guys I'm currently doing a auto conversiono on my 1994 gsr Lancer. It has a 2 litre 4g63 engine already. I bought a kiggly flex plate kit as my crank was a 6 bolt. That's all good. I put an rvr auto 4wd transmission in but now I don't know which gearbox mount to use. Any help? This is the mount on the drivers side as the manual evo 3 gearbox mount or the rvr auto gearbox mount won't work. Which car auto transmission mount do I use. Also I have complete evo3 manual conversion up for sale. Which includes genuine evo 3 gearbox, transfer case, pedal box, cables with bearings, clutch master cylinder and slave cylinder, exedy heavy duty button clutch brand new done less than 500kms, and also manual shifter.Open to offers as 3rd sometimes is hard to get into but other times is fine. Located in Melbourne, Vic. Please help me as I miss my car being on the road :(

#2
jack be nimble
Posted 23 June 2015 - 12:39 PM

jack be nimble

    master of none

  • Donating Members
  • PipPipPip
  • 8,301 posts
  • Locationperth sor. 20 mins from brians place
The correct mount will be the mount from a auto gsr. Good luck with that.....

Whays wrong with the rvr box mount and a gsr body mount? High, low, or too far forward and back?
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.

#3
jack be nimble
Posted 23 June 2015 - 12:41 PM

jack be nimble

    master of none

  • Donating Members
  • PipPipPip
  • 8,301 posts
  • Locationperth sor. 20 mins from brians place
Teds box fits, ask him.
also robevo may know, or he might of just made something work....

somethimg about magnas tickling my brain
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.

#4
jetevo3
Posted 23 June 2015 - 12:54 PM

jetevo3

    Member

  • Members
  • PipPip
  • 12 posts
  • Locationmelbourne, victoria
Thanks for that. The gsr body mount won't fit into the rvr box mount.

#5
jack be nimble
Posted 23 June 2015 - 10:23 PM

jack be nimble

    master of none

  • Donating Members
  • PipPipPip
  • 8,301 posts
  • Locationperth sor. 20 mins from brians place
Is it as simple as using a rvr bush in the gsr mount?
Or narrowing the gsr bush to suit the rvr mount.
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.

#6
Cranked
Posted 24 June 2015 - 01:03 AM

Cranked

    Advanced Member

  • Donating Members
  • PipPipPip
  • 1,237 posts
  • LocationWollongong
Does the gsr box mount interchange with auto box mount?
GSR Lancer- JE-73-VO, 11.701@125mph, 1.79 60" and getting faster. No:3 conrod now orbiting the moon.

#7
evo-gsr
Posted 24 June 2015 - 04:03 AM

evo-gsr

    Advanced Member

  • Active Members
  • PipPipPip
  • 10,379 posts
  • LocationBuddhist Temple NSW
Its no good when you cant mount a box anymore.....
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]

#8
jack be nimble
Posted 24 June 2015 - 04:14 AM

jack be nimble

    master of none

  • Donating Members
  • PipPipPip
  • 8,301 posts
  • Locationperth sor. 20 mins from brians place
No. The gsr box mount wont bolt onto rvr box.

i thought it was in teds members ride, what mounts he used.
I was probably going to cut and shut the gsr body mount to suit for me.
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.

#9
Cranked
Posted 24 June 2015 - 07:34 AM

Cranked

    Advanced Member

  • Donating Members
  • PipPipPip
  • 1,237 posts
  • LocationWollongong
^^^ that's where I'd go. Backyard engineering at it's best!
GSR Lancer- JE-73-VO, 11.701@125mph, 1.79 60" and getting faster. No:3 conrod now orbiting the moon.

#10
evo-gsr
Posted 24 June 2015 - 07:35 AM

evo-gsr

    Advanced Member

  • Active Members
  • PipPipPip
  • 10,379 posts
  • LocationBuddhist Temple NSW
Dont encourage Jack.....He has lots of backyard ideas already.
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]

#11
evo-gsr
Posted 24 June 2015 - 07:36 AM

evo-gsr

    Advanced Member

  • Active Members
  • PipPipPip
  • 10,379 posts
  • LocationBuddhist Temple NSW
Whoops...forgot the italics....r e l a x - Jack - r e l a x....
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]

#12
jetevo3
Posted 24 June 2015 - 08:02 AM

jetevo3

    Member

  • Members
  • PipPip
  • 12 posts
  • Locationmelbourne, victoria
I'll have a look on the weekend really can't be bothered so over this car

#13
Cranked
Posted 24 June 2015 - 09:13 AM

Cranked

    Advanced Member

  • Donating Members
  • PipPipPip
  • 1,237 posts
  • LocationWollongong
I'm all fir backyard engineering
GSR Lancer- JE-73-VO, 11.701@125mph, 1.79 60" and getting faster. No:3 conrod now orbiting the moon.

#14
jack be nimble
Posted 24 June 2015 - 11:01 AM

jack be nimble

    master of none

  • Donating Members
  • PipPipPip
  • 8,301 posts
  • Locationperth sor. 20 mins from brians place
Worth looking at a auto proton for both mounts, i reckon. Taks the rvr box mount to compare mounting points.


its ok, i have valium that i had left over from the sick dog. Fully relaxed.
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.

#15
ted
Posted 25 June 2015 - 03:07 AM

ted

    Advanced Member

  • Active Members
  • PipPipPip
  • 1,670 posts
  • LocationWodonga VIC

I used a magna gearbox mount welded to the original gearbox mount plate...it works well.


#16
jetevo3
Posted 25 June 2015 - 08:04 AM

jetevo3

    Member

  • Members
  • PipPip
  • 12 posts
  • Locationmelbourne, victoria
Ted which magna? Photos?

#17
jack be nimble
Posted 25 June 2015 - 09:50 AM

jack be nimble

    master of none

  • Donating Members
  • PipPipPip
  • 8,301 posts
  • Locationperth sor. 20 mins from brians place
+1^ teddles.

Did you try/look at a auto proton mount ted?
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.

#18
leadfoot
Posted 25 June 2015 - 01:46 PM

leadfoot

    Moderator

  • Moderators
  • 3,429 posts
  • LocationGold Coast
Fwd and awd boxes are dofferent jack awd boxes sit higher up and the mounts are different shapes in the bolt pattern

yes it's me KHUBNER

#19
jack be nimble
Posted 25 June 2015 - 02:14 PM

jack be nimble

    master of none

  • Donating Members
  • PipPipPip
  • 8,301 posts
  • Locationperth sor. 20 mins from brians place
Thanks.i know they bloody big and heavy.
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.

#20
jetevo3
Posted 25 June 2015 - 09:48 PM

jetevo3

    Member

  • Members
  • PipPip
  • 12 posts
  • Locationmelbourne, victoria
So which awd mount will work?
Back to Evolution 1-3, CC GSR Technical

2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users

  1. 4GTuner
  2. → 4G Powered Technical Discussion
  3. → Evolution 1-3, CC GSR Technical