wassup guys... just a quick Q
my E1 had a no start issues.. i manage to get it fix by rewiring 1 of the MPI relay with a aftermarket Bosch relay..
i also had a lot of oil in my intercooler charge pipes suspect the compressor seal worn of already.. but my real problem is no boost when i drive it.. even the turbo light on the dash wont lit..
is this because of the relay or the leaking turbo compressor wheel..?
Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
#1
Posted 07 December 2015 - 09:03 PM
brownsound79
-
- Members
-
- 22 posts
Member
- LocationKuala Lumpur.Malaysia
Back to top
#2
Posted 07 December 2015 - 09:08 PM
jack be nimble
-
- Donating Members
-
- 8,301 posts
master of none
- Locationperth sor. 20 mins from brians place
Did e1 have a working light?
Give it a compression test for 8ndication of where oil is from.
and a boost leak test to find where the boost is going.
neither the oil or the relay willmake you lose that much boost.
Give it a compression test for 8ndication of where oil is from.
and a boost leak test to find where the boost is going.
neither the oil or the relay willmake you lose that much boost.
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.
#3
Posted 07 December 2015 - 09:33 PM
evo-gsr
-
- Active Members
-
- 10,379 posts
Advanced Member
- LocationBuddhist Temple NSW
Yes..Evo 1 have the light Jack..just as he posted.
Boost leak test as suggested would be a good start.
Dont know how?
Google it..easy job that will cost around $10 to make one.
Boost leak test as suggested would be a good start.
Dont know how?
Google it..easy job that will cost around $10 to make one.
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]
Trust in the master of taxis.... He will set you straight[/quote]
#4
Posted 08 December 2015 - 12:00 AM
BMGTZ
-
- Donating Members
-
- 4,554 posts
Grumpy old man from the school of hard knocks
- Locationsouthside of perth WA
other than the failing to boost does it rev cleanly? ....no other issues ?
BRIAN
Black evo 1 full road rego and done properly/legally
I have heaps of parts...but never the one I need.
#5
Posted 08 December 2015 - 01:11 AM
trist
-
- Active Members
-
- 725 posts
Advanced Member
- LocationSt Andrews
is the waste gate actuator still attached to the flapper?
current rides
black aus spec vr4
red 86 diesel pajero
2008 yamaha wr 250 r
go the 4 bangers
black aus spec vr4
red 86 diesel pajero
2008 yamaha wr 250 r
go the 4 bangers
#6
Posted 08 December 2015 - 02:58 AM
White Knight
-
- Active Members
-
- 930 posts
Advanced Member
- LocationGympie
+1 for Trist. If not connected to the wastegate arm the most a 16g will tend to make is 3-4psi.
I made a boost leak tester a few weeks ago with bits from Bunnings. $6:70 total cost.
Plumbing section, 50mm rubber cup, end cap to suit. Drill out hole on centte of cap and screw in a tap to suit compressor.
But, my money is on actuator not being connected.
I made a boost leak tester a few weeks ago with bits from Bunnings. $6:70 total cost.
Plumbing section, 50mm rubber cup, end cap to suit. Drill out hole on centte of cap and screw in a tap to suit compressor.
But, my money is on actuator not being connected.
#7
Posted 08 December 2015 - 03:13 AM
evo-gsr
-
- Active Members
-
- 10,379 posts
Advanced Member
- LocationBuddhist Temple NSW
I reckon turbo is fucked.
- VIN18M, Miniman_alis and brownsound79 like this
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]
Trust in the master of taxis.... He will set you straight[/quote]
#8
Posted 08 December 2015 - 04:00 AM
Miniman_alis
-
- Active Members
-
- 219 posts
Advanced Member
- LocationBrisbane
Had a r33 skyline that wouldn't boost and the intercooler was full of oil, the turbo was absolutely shagged the compressor blades were broken and the shaft was bent.
#9
Posted 08 December 2015 - 03:54 PM
brownsound79
-
- Members
-
- 22 posts
Member
- LocationKuala Lumpur.Malaysia
the engine rev smooth but compressor fin does wobble like more than it should be..
after a long sleep.. (almost a year) i never thought that it will happen like this.. should left it sleep for a another year though.. lol
after a long sleep.. (almost a year) i never thought that it will happen like this.. should left it sleep for a another year though.. lol
#10
Posted 08 December 2015 - 11:19 PM
White Knight
-
- Active Members
-
- 930 posts
Advanced Member
- LocationGympie
#11
Posted 09 December 2015 - 04:26 AM
brownsound79
-
- Members
-
- 22 posts
Member
- LocationKuala Lumpur.Malaysia
hopefully theres nothing wrong with the relay wiring.. TD05H rebuild kit (Holset) is dirt cheap here..
and its fairly simple fix rather than debugging wires under the dash..
and its fairly simple fix rather than debugging wires under the dash..
#12
Posted 09 December 2015 - 06:09 AM
evo-gsr
-
- Active Members
-
- 10,379 posts
Advanced Member
- LocationBuddhist Temple NSW
I dont think relay wiring would stop turbo boosting....
- brownsound79 likes this
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]
Trust in the master of taxis.... He will set you straight[/quote]
#13
Posted 09 December 2015 - 09:53 AM
brownsound79
-
- Members
-
- 22 posts
Member
- LocationKuala Lumpur.Malaysia
#15
Posted 09 December 2015 - 10:52 AM
brownsound79
-
- Members
-
- 22 posts
Member
- LocationKuala Lumpur.Malaysia
no wonder..
#16
Posted 09 December 2015 - 10:53 AM
evo-gsr
-
- Active Members
-
- 10,379 posts
Advanced Member
- LocationBuddhist Temple NSW
Post no 7 nailed it !
- Miniman_alis likes this
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]
Trust in the master of taxis.... He will set you straight[/quote]
#17
Posted 13 December 2015 - 09:10 AM
brownsound79
-
- Members
-
- 22 posts
Member
- LocationKuala Lumpur.Malaysia
#18
Posted 14 December 2015 - 03:04 AM
BYBY5L
-
- Active Members
-
- 2,047 posts
Member
- LocationMelbourne
#19
Posted 14 December 2015 - 03:48 AM
brownsound79
-
- Members
-
- 22 posts
Member
- LocationKuala Lumpur.Malaysia
nope.. looks ok.. no scratch or bent whatsoever.. just clean up CHRA and replace all the seals stuff needed.
and...
i think the turbine housing need a little porting job..
and also a little porting job on this cast iron stock Evo3 manifold to match the turbinw..
work in progress...
and...
i think the turbine housing need a little porting job..
and also a little porting job on this cast iron stock Evo3 manifold to match the turbinw..
work in progress...
Edited by brownsound79, 14 December 2015 - 03:51 AM.
#20
Posted 14 December 2015 - 04:16 AM
Cranked
-
- Donating Members
-
- 1,237 posts
Advanced Member
- LocationWollongong
I think what Benzo was trying to say is that ur inducer/exducers outer edges shouldn't be rounded like that. Hence BYBY5L asking are u changing it.
GSR Lancer- JE-73-VO, 11.701@125mph, 1.79 60" and getting faster. No:3 conrod now orbiting the moon.
Also tagged with one or more of these keywords: boost, evo1
|
Automotive Discussion →
Introductions →
Wagon build videos from the states!Started by Mod Nectar, 08 Jun 2018  video, new, wagon build, build and 6 more...
|
|
|
|
|
|
4GTuner Marketplace →
Cars For Sale →
FS 1992 VR4 For SaleStarted by richard andrew, 11 Dec 2017 1992 VR4, for sale, evo1 and 1 more...
|
|
|
|
|
|
4GTuner Marketplace →
Car Parts For Sale →
Evo 3 Front Cross Member CD9A CROSSMEMBER CC GSR EVO-1 2 3 1992-1997Started by METHODEVO, 12 Jun 2017 evo3, cd9a, gsr, crossmember and 2 more...
|
|
|
|
|
|
4G Powered Technical Discussion →
RVR Sports & Hyper Sports Gear Technical →
Possible Boost leakStarted by RVR-ED, 21 Dec 2015 rvr, ssg, boost, leak
|
|
|
|
|
|
4G Powered Technical Discussion →
Evolution 1-3, CC GSR Technical →
Evo 1 front bumper onto lancer cc gsrStarted by molemac, 28 Oct 2013 evo1, lancer, cc, gsr
|
|
|
3 user(s) are reading this topic
0 members, 3 guests, 0 anonymous users
