28 replies to this topic

[RVRHSG]

Hey guys, I recently bought a proton gti with 4G93T and am looking for some easy bolt on since its stock as rock. No history available of what was done to the car by the previous owner beside a walbro 225lph, some unknown fuel reg and chipped ecu has been put in.

 

Done a compression test on all cylinders all are consistent and checked this morning it currently has the usual factory part from 1.8L GSR:

Turbo - TD04L
ECU - MD187040 E2T38378
MAF - 449 E5T05371
Injectors - white MDL390

 

Questions:
1) I heard the td05-14b from gvr4 is a perfect bolt on to give continuous boost up to 7k rpm, stock manifold required to be ported to match the turbo and require some slight adjustment on the down pipe. Any proton owners here with 4g93t has any clearance issue with the 14B turbo? eg housing hitting the fan etc?

2) If I were to go for the td05-14b from gvr4, is it recommended to stick with the gvr4 ecu, maf, and injectors?

3) Did some research not sure are the correct following parts for the complete the bolt on? Please advise.

ECU - GVR4 ECU (MD165810 or MD165811) eprom.
MAF - any idea whats the gvr4 maf part number?
Injectors - MDL450 or B450L.

For the 450cc injectors which is more suitable for 4g93T single spray or dual spray? Or it doesn't really matter. 

http://cloneecu.com/archives/1537
http://www.4gtuner.c...-spray-pattern/

 

Many thanks!
Wae

 

[VIN18M]

Td05 14b will clear fans as my 20g clears on the stock manifold. Although I'm fairly certain there will be some mods required to the dump pipe/down pipe.
Pretty sure the 14b can be run on the GSR ecu with 450cc VR4 injectors up to around 14psi, I don't think single vs twin spray will make a difference.

[RVRHSG]

Slight change of plan, so far I have the following items:

 

-td05-14b with 7cm exh housing.
-Yellow MD510 injectors
-609 afm

Still unsure should I go for the evo 1-2 ecu or continue using the current gsr ecu MD187040 to run with ecmlink for the above setup. 

 

I heard that if uses evo ecu it can direct plug n play but will run rich. Any inputs on this?

Edited by RVRHSG, 20 May 2016 - 04:41 AM.

[leadfoot]

Direct plug and play wont run rich will be fine ran mine on a 16g with boltons fine

[Adrian]

Can you feel the love

[RVRHSG]

Hahaha you guys need some gloves to resolve the problems in the ring?

[leadfoot]

Its ok hes just jealous he wasnt young dumb and didnt give a shit what other people thought or said to do something dimilar to his car. Ill say what i say to anyone i built my car for me not you its mine and ill do whatever the hell i want to it if you dont like it fine because i didnt do it for you so keep your shitty opinion to yourself.

On topic a 4g93 is a 4g93 if its a favtory proton dohc i wouldnt go much higher than 10psi wjth either the 14b or 16g as the hogher comp will have you stressing components sooner

[BMGTZ]

Kyle you are admitting to being dumb when you put a snake pic on yob bonnet ?

[VIN18M]

He said it's a 93t so can probably run up to 14psi on the 14b

[leadfoot]

We were all dber whwen we were younger unless your an old fart whose started forgetting shit

[evo-gsr]

Doesn't take much to upset you.
Can assure you I am DEFINITELY not jealous of anything in regards to you Kyle.

Edited by evo-gsr, 21 May 2016 - 11:09 PM.

[BMGTZ]

Nope. Not me Kyle ... I was never that dumb.

Still don't forget stuff either. ... Or forgive

[Cranked]

Dumb enough to ignore everyone's advice and get minimal results....

[Adrian]

...

Attached Thumbnails

• 

[Adrian]

Kyle koalas have syphilis dude. Get a checkup!

Attached Thumbnails

• 

[BMGTZ]

Dumb enough to ignore everyone's advice and get minimal results....

Ah who? Is this aimed at ....

[evo-gsr]

Kyle koalas have syphilis dude. Get a checkup!

Lol!!!! WTF??

[evo-gsr]

Ah who? Is this aimed at ....

Not you B Banger.

[CLuTZ]

This thread hurts my head....

 

To the OP, 14b's 6cm housings are notorious for being cracked, so make sure you check it out first

Edited by CLuTZ, 02 June 2016 - 11:27 AM.

[evo-gsr]

This threat hurt my head....
 
To the OP, 14b's 6cm housings are notorious for being cracked, so make sure you check it out first

Who threatened who?