13 replies to this topic

[Bryce]

just wondering if anyone has an evo 7-8-9 tps + plug laying around at all?

[BYBY5L]

Hmmm, not 100% but I might have one, I'll have a look later today

[leadfoot]

Check es lancer if you strike out they might be the same

[caged]

7 is different to 8 and 9 from memory

[Bryce]

Oh right. The TB i recieved (was meant to be early evo) is this http://s90racing.com...-s90-mit-370-2/

Says 789. But after some research your right. 8 and 9 are the same and 7 is different

Sent from my SM-G920I using Tapatalk

[Bryce]

MD628074. Either way it doesnt matter as i have to wire a new plug onto it anyway

Sent from my SM-G920I using Tapatalk

[caged]

Plug is the same. 7 has slotted holes 8/9 doesn't and is not adjustable.

[BYBY5L]

Is it smaller than the gsr/ evo type, does it turn the same direction too,
I found a few different types...

[Bryce]

PMd

Sent from my SM-G920I using Tapatalk

[Mr Gears]

Plug is the same. 7 has slotted holes 8/9 doesn't and is not adjustable.

I confirm that this information is incorrect. The TPS is the same for all CT9A. The plug is the same as almost every other Mitsu TPS except EVO7-9 use only 3 wires. There is no closed throttle switch integrated in that TPS.

[caged]

I ment e7-9 are the same. He said he didn't care as he was changing the plug anyway. It made it sound like the difference in sensors was only the plug.

[Bryce]

I dont have a plug currently. It only has 3 blade crimp connectors. Thats why i added about the plug.

Sent from my SM-G920I using Tapatalk

[Mr Gears]

Same 4 position plug. You just only need to use 3 of the wires.

 

 

I can hook you up if you need it

https://sites.google...s/4p-connectors

[leadfoot]

also adjustment wouldn't matter as his ecu will have a tps calibration in it. the adjustment would only mater if the throttle closed switch was integrated like it is in 4 wire units or some oe uses