11 replies to this topic

[Mirage-cyborg]

Hey guys i'm Josh and new to this forum but not new to forums 

Ill just do a short wright up of my car as iv lost everything off gsrcyborgclub.org

 

Here is my 1991 Cyborg

 

Vr4 engine

Evo6 pistons

vr4 rods

acl bearings

Standard head

N/a Intake

gt2876r turbo

sinco manifold

Link g4 computer tuned to 238kw atw

 

Bc gold adj suspension: evo top hats, front vr4 shocks and skyline rears with evo1 spring rates 

 

Brakes are from a FTO twin pots with zonelli heat treated disc's, ebc yellow stuff pads

 

Currently upgrading the drive line..

 

Has run a best of 11.9@116mph

 

Current state ^

[Mirage-cyborg]

https://www.youtube....h?v=FL88Ey69nf4

 

Video of a 12.0 and theres others on my channel 

[evo-gsr]

Beast!! Love the yellow paint...

AWD??

[Mirage-cyborg]

Thanks mate, yep its awd. You can see in the video how short the old gearing ratio was, i was running out of puff in the top of 4th

[bazeng]

I've always loved that shape of Lancer here in Australia. Reminds me of my old suzuki swift gti..

What are your plans or goals? Next mods?

[ENGINR]

Tidy looking little beasty - nice job!

[Mirage-cyborg]

I've always loved that shape of Lancer here in Australia. Reminds me of my old suzuki swift gti..

What are your plans or goals? Next mods?

short term plans are to run consistent 11's and eventually run a 10.. Next mods are converting the driveline from 2.8 ratio to 3.5 which is much stronger

[SIVART]

I dont think there is any C83As in Aus , Nice rare find 

[evo-gsr]

.

Edited by evo-gsr, 08 November 2016 - 06:22 AM.

[Mirage-cyborg]

I found something Interesting with the front sway bars from two different models...

 

 

The one on the left was out of my c83a hatch and the one on the right in out of a c73a

Im not sure how much bigger it is but it should make a difference.

[Mirage-cyborg]

So since replacing the gearbox with a vr4 gearbox with a evo 2 gearset and switching to 3.5 ratios i finally found

a rear diff to match, its an open diff but with a crown and pinion from a gsr. That was in the car for about a week and 

Then i found a very rear Libero 2way mechanical diff... 

 

Anyway i thought i might give my gear linkages a freshen up and i found why the gear stick felt so sloppy..

 

 

Whats left of the old bushes.

 

I got the kit from jnztuning and it worked a treat.

 

Drove around for about 50ks after having installed everything and then blew the head gasket    

 

[bazeng]

Ouch