180 replies to this topic

[evo-gsr]

Meek would have the flywheel bolts for sure..possibly the other bits and pieces you need also.
Give them a call?

[BYBY5L]

Those long bolts into the transfer case ya looking for are a pain in the ass to find, being that big and a fine thread means they're not a common off the shelf bolt, at least not in any shops around me but you might be more fortunate, I ended up going to a wholesale supplier and got lucky the boss was a fellow evo driver, or I would have had to buy a box... measure the bolt an ring around first,
The mount- cross check part numbers with a nimbus, usually 1 or 2 around at a wreckers, worked out cheaper to get the solid mounts and refurbish the old than it was to get new genuine ones

[evo-gsr]

If they are same as evo/gsr I have some here. The transfer bolts that is

[BYBY5L]

^give this bloke a shell I reckon you could probably build an evo out of yours parts collection an still have spares, lol,
From memory they are similiar but but cant 100% be sure as Ive only pulled 1 manual rvr box ever, and it was at imlachs in the pouring rain so was done with much haste, lol

[bazeng]

i have all the bolts you mention... but for a Galant VR4.

If you get stuck, message me...

[evo-gsr]

^give this bloke a shell I reckon you could probably build an evo out of yours parts collection an still have spares, lol,
From memory they are similiar but but cant 100% be sure as Ive only pulled 1 manual rvr box ever, and it was at imlachs in the pouring rain so was done with much haste, lol

Lol..probably not far off!.

[Taz]

I managed to get new genuine flywheel bolts overnight for 3 bucks a pop, pulled a lot of strings to make that happen. Transfer bolts still need so I'll pm when I get home about that. Waiting to hear on Mount from another supplier. I have plenty of bolts for the transfer from my collection but they're all about 15mm too long lol.

[Taz]

Still desperately chasing a manual mount. Gotta be rvr or eclipse. I'm connected with wreckers Australia and Nz wide. Know a dozen different specialist wreckers and literally nothing. Need one asap. Getting very desperate indeed.

[Cranked]

No other mounts will fit?

[evo-gsr]

Apparently not.....

[BYBY5L]

Tried new?
Hmmm, Didnt think an eclipse mount would be the same,

Have you got the part number?

[Cranked]

I'm just thinking Sonata. Galant. Other lancers

[Parabola]

Hit up tbowgn, he makes them & might have a few & is localish

[Taz]

Rvr and eclipse are the only 2 that will fit. I have physically tried galant/sonata etc but the chassis rail is too low. Won't reach the rvr rail and the bolt pattern through the rail is also ever so slightly different. Tried new. I can get them through local dealership. 350 bucks and a monthout of Japan. EBay has 2 in America again with a lengthy wait. That's the killer I need this on the road and driving by the 8th. 12th at the latest. Just spent 4 hours trying to put the motor in and had to back track and take the boxback out. Almost gonna throw in the towel with this one. Just way to much time and effort for 0 yield

[White Knight]

Sending you a pm. Might have what you need buddy, I've got front and rear gearbox mounts here.

[Taz]

Also still chasing the transfer bolts and slave cylinder bolts. Txt sent mate

[Taz]

Also still chasing mount. White knight doesn't have the right one

[White Knight]

Sorry bud....

[Taz]

All good mate. Bit the bullet last night and forked out for a new one. Just hope it gets here in time. Still chasing the bolts though

[White Knight]

Those bolts are c*/*nts to replace. I had the same problem near 4 years ago and a local bolt shop matched them up, he has since closed though....