What issues would i run into? I understand that i have to change the vr4 engine mount over from the cam cover side..
Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
#1
Posted 17 February 2017 - 12:57 AM
Mirage-cyborg
-
- Members
-
- 47 posts
Advanced Member
- LocationNew Zealand
Back to top
#2
Posted 17 February 2017 - 02:45 AM
Cranked
-
- Donating Members
-
- 1,237 posts
Advanced Member
- LocationWollongong
There will be no facility for the front engine mount to to mount onto the block, as GSR/Evo they mount onto the gearbox. If you had to, I'm sure you could fabricate something to suit.
GSR Lancer- JE-73-VO, 11.701@125mph, 1.79 60" and getting faster. No:3 conrod now orbiting the moon.
#3
Posted 17 February 2017 - 11:16 PM
Mirage-cyborg
-
- Members
-
- 47 posts
Advanced Member
- LocationNew Zealand
When you say fabricate would that involve welding a mount to the block?
Iam being offerd a very nice deal on a forged stroker motor thats just to good to turn down
Iam being offerd a very nice deal on a forged stroker motor thats just to good to turn down
#4
Posted 18 February 2017 - 04:14 AM
bazeng
-
- Active Members
-
- 9,899 posts
Gday maaaate
- LocationMelbourne
No.. The VR4 has mounts on the block (front and rear) the Evo blocks don't have this. They bolt to the bellhousing.
So you will need to somehow make the mounts fit the stock position on your chassis to the Evo engine.. Depending if you are using the Evo trans. You can make the mount from the trans to the chassis. If vr4 box. You won't have any mounts to use! Hence fabrication requirements.
So you will need to somehow make the mounts fit the stock position on your chassis to the Evo engine.. Depending if you are using the Evo trans. You can make the mount from the trans to the chassis. If vr4 box. You won't have any mounts to use! Hence fabrication requirements.
AMG | http://www.4gtuner.c...mmc-galant-amg/
GVR4 | http://www.4gtuner.c...shi-galant-vr4/
Springy Motors | Autronic | Motec
#5
Posted 20 February 2017 - 08:34 AM
Cranked
-
- Donating Members
-
- 1,237 posts
Advanced Member
- LocationWollongong
What box are you using?
GSR Lancer- JE-73-VO, 11.701@125mph, 1.79 60" and getting faster. No:3 conrod now orbiting the moon.
#6
Posted 21 February 2017 - 12:01 AM
Mirage-cyborg
-
- Members
-
- 47 posts
Advanced Member
- LocationNew Zealand
Vr4 box, if i were to use a evo box would the mounts line up with my cross member or would i need a evo one?
#7
Posted 22 February 2017 - 11:05 PM
mtking
-
- Members
-
- 44 posts
Advanced Member
- Locationgold coast
no because the vr4 motor has all engine mounts on the block and evo have them on the motor and gearbox it would not have any north south engine mounts maybe if u use a evo box and get some mounts fab up
#8
Posted 23 February 2017 - 02:12 AM
evo-gsr
-
- Active Members
-
- 10,379 posts
Advanced Member
- LocationBuddhist Temple NSW
Must be an echo on here....Im sure thats what was posted in post number 2 almost a week ago...
Wait there it is....
Wait there it is....
There will be no facility for the front engine mount to to mount onto the block, as GSR/Evo they mount onto the gearbox. If you had to, I'm sure you could fabricate something to suit.
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]
Trust in the master of taxis.... He will set you straight[/quote]
#9
Posted 23 February 2017 - 12:22 PM
mtking
-
- Members
-
- 44 posts
Advanced Member
- Locationgold coast
Must be an echo on here....Im sure thats what was posted in post number 2 almost a week ago...
Wait there it is....
hahah dnt read it just putting my 2c in i was running late for work i replayed to him abut the gearbox qus he had ok champ
Vr4 box, if i were to use a evo box would the mounts line up with my cross member or would i need a evo one?
#10
Posted 23 February 2017 - 08:54 PM
Mirage-cyborg
-
- Members
-
- 47 posts
Advanced Member
- LocationNew Zealand
After many searches on different forums i have read that the rear mount (closest to the firewall) bolts up?? Im not sure where as people say there is no facilitie for any mounts on the evo block. The front cross member mount will have to be fabricated. But nobody has explained or shown with pictures how it has been done
#11
Posted 04 March 2017 - 09:20 PM
CLuTZ
-
- Active Members
-
- 12,121 posts
Diamonds are forever....
- LocationMelbourne VIC
The EVO's mounts bolt up to the gearbox, which is what you will do with the rear mount, using the EVO part
Edited by CLuTZ, 04 March 2017 - 09:21 PM.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
