Hi
Got an ecmlink installed into my 3.
Chip seems to be functioning fine. I'm able to log, change injector settings etc..
My issue is the ecu won't read my speed therefore launch control is no good. Limits revs even while moving.
I've pulled the cluster and confirmed the rsw screw is in place. Have also confirmed that I'm getting 4.7v's to the pin behind the cluster and tried one from another car.
I'm stumped, any ideas guy's?
Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
#1
Posted 11 April 2017 - 02:49 PM
Mastershake
-
- Members
-
- 2 posts
Newbie
- LocationThe Bahamas
Back to top
#2
Posted 11 April 2017 - 03:08 PM
jack be nimble
-
- Donating Members
-
- 8,301 posts
master of none
- Locationperth sor. 20 mins from brians place
Do you have a top clutch switch installed on pedal box?
Launch control needs this also.
Launch control needs this also.
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.
#3
Posted 12 April 2017 - 10:55 AM
Cranked
-
- Donating Members
-
- 1,237 posts
Advanced Member
- LocationWollongong
Plus 1 for Jack's comment.
GSR Lancer- JE-73-VO, 11.701@125mph, 1.79 60" and getting faster. No:3 conrod now orbiting the moon.
#4
Posted 13 April 2017 - 12:18 AM
evopwr
-
- Active Members
-
- 3,283 posts
[DIY]
- LocationMelbourne
#5
Posted 13 April 2017 - 01:27 AM
BMGTZ
-
- Donating Members
-
- 4,554 posts
Grumpy old man from the school of hard knocks
- Locationsouthside of perth WA
ECMlite doesn't need a clutch switch on an early evo if you disable the the clutch switch in the right place. I don't have a switch in any of mine and it works fine....i just cant recalled where to disable it as its been a while since Ive used the program. flick through the tabs and check to see if you can tick a box
The problem you describe is also common if the speedo cable is broken.
BRIAN
Black evo 1 full road rego and done properly/legally
I have heaps of parts...but never the one I need.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
