Hi all I fitted the Link G4+ ecu in my evo3 gsr and I am not sure the ISC wiring if it is correct or not....do somebody have the 6 wire ISC schematic/pinout?
Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Back to top
#2
Posted 05 October 2017 - 07:52 PM
bazeng
-
- Active Members
-
- 9,899 posts
Gday maaaate
- LocationMelbourne
This is the pin sequence.
Ensure that the link is wired with the outputs accordingly.
2 and 5 being the supply.
The other pins being the pull to Gnd.
Obviously you need to ensure you outputs are connected according to sequence.
Sent from my MI 5s using Tapatalk
Edited by bazeng, 05 October 2017 - 07:53 PM.
- White Knight likes this
AMG | http://www.4gtuner.c...mmc-galant-amg/
GVR4 | http://www.4gtuner.c...shi-galant-vr4/
Springy Motors | Autronic | Motec
#3
Posted 06 October 2017 - 02:06 PM
leadfoot
-
-
Moderators -
- 3,429 posts
Moderator
- LocationGold Coast
#4
Posted 21 October 2017 - 04:28 AM
Golfer2000
-
- Members
-
- 39 posts
Advanced Member
- LocationUSA
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
