Just a kid at Christmas post. I just bought my first bits for my planned 94mm stroker build. Got some Brian Crower H beams with 22mm pins for $400 aud. Seller bought but never took the rods out of the plastic. Full retail is $640 aud.
Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
#1
Posted 01 November 2017 - 09:45 AM
LumpyVR4
-
- Active Members
-
- 351 posts
Advanced Member
- LocationSydney
ECM Link, 399 MAF, 560cc injectors, 270 cams, TD05-20G @22psi, 3" dump, full 3" mandrel exhaust, intercooler, Fidanza alloy flywheel, 4 bolt LSD, EVO IV brakes, Strut braces, coil overs and sway bars.
Back to top
#2
Posted 01 November 2017 - 10:01 AM
Starion VR4 Derek
-
- Active Members
-
- 114 posts
Advanced Member
- LocationBurrum Heads
#3
Posted 08 March 2018 - 10:02 PM
LumpyVR4
-
- Active Members
-
- 351 posts
Advanced Member
- LocationSydney
Got a friend to bring me a present back from the US.
94mm stroke. I decided to trade off between torque and revs, and keep an OKish rod ratio.
- Cranked likes this
ECM Link, 399 MAF, 560cc injectors, 270 cams, TD05-20G @22psi, 3" dump, full 3" mandrel exhaust, intercooler, Fidanza alloy flywheel, 4 bolt LSD, EVO IV brakes, Strut braces, coil overs and sway bars.
#4
Posted 09 March 2018 - 03:15 AM
brisvr4
-
-
Moderators -
- 4,486 posts
Member
- LocationBrisbane - Southside
What airline did they fly with it?
Tim
Dsmlink V3 + E85 
11.37 @ 131.46 ... still more in her
Remember Kids... Google does not equal research!
Magnus
How much time do you spend in a parking lot with your performance car? If you do a lot of parking lot driving, and hang out in parking lots, chances are you are a ricer, go home and read import tuner. If you’re complaining about noise you should not be modifying your car. You should also consider no longer being a man, please hand in your genitals at the door.
#5
Posted 09 March 2018 - 09:44 AM
LumpyVR4
-
- Active Members
-
- 351 posts
Advanced Member
- LocationSydney
FIJI airlines. Cost me 150 usd vs the 250 best shipping price I found.
ECM Link, 399 MAF, 560cc injectors, 270 cams, TD05-20G @22psi, 3" dump, full 3" mandrel exhaust, intercooler, Fidanza alloy flywheel, 4 bolt LSD, EVO IV brakes, Strut braces, coil overs and sway bars.
#6
Posted 17 April 2018 - 09:42 PM
LumpyVR4
-
- Active Members
-
- 351 posts
Advanced Member
- LocationSydney
Seeing as the Galant is getting old, to head off any middle age spread I bought it a girdle.
Attached Thumbnails
ECM Link, 399 MAF, 560cc injectors, 270 cams, TD05-20G @22psi, 3" dump, full 3" mandrel exhaust, intercooler, Fidanza alloy flywheel, 4 bolt LSD, EVO IV brakes, Strut braces, coil overs and sway bars.
#7
Posted 20 April 2018 - 01:46 AM
VIN18M
-
- Active Members
-
- 1,209 posts
Advanced Member
- LocationSydney
#8
Posted 20 April 2018 - 02:57 AM
evo-gsr
-
- Active Members
-
- 10,379 posts
Advanced Member
- LocationBuddhist Temple NSW
I bet your wallet doesn't but!
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]
Trust in the master of taxis.... He will set you straight[/quote]
#9
Posted 20 April 2018 - 06:51 AM
VIN18M
-
- Active Members
-
- 1,209 posts
Advanced Member
- LocationSydney
#10
Posted 20 April 2018 - 10:07 AM
LumpyVR4
-
- Active Members
-
- 351 posts
Advanced Member
- LocationSydney
This was another trip bring back. There is a big broadcast convention in Vegas and a couple of the sales guys went. My wallet was still hurting a bit from the crank, but I had to get something, and the girdle fits in a bag easy. Plus best shipping was $150 to Aus, and it cost me $10.
ECM Link, 399 MAF, 560cc injectors, 270 cams, TD05-20G @22psi, 3" dump, full 3" mandrel exhaust, intercooler, Fidanza alloy flywheel, 4 bolt LSD, EVO IV brakes, Strut braces, coil overs and sway bars.
#11
Posted 02 May 2018 - 10:22 PM
LumpyVR4
-
- Active Members
-
- 351 posts
Advanced Member
- LocationSydney
Leaving it to you to figure out.
ECM Link, 399 MAF, 560cc injectors, 270 cams, TD05-20G @22psi, 3" dump, full 3" mandrel exhaust, intercooler, Fidanza alloy flywheel, 4 bolt LSD, EVO IV brakes, Strut braces, coil overs and sway bars.
#12
Posted 03 May 2018 - 09:45 AM
jack be nimble
-
- Donating Members
-
- 8,301 posts
master of none
- Locationperth sor. 20 mins from brians place
Straight cut reverse, ftw!
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.
#13
Posted 03 May 2018 - 08:49 PM
Starion VR4 Derek
-
- Active Members
-
- 114 posts
Advanced Member
- LocationBurrum Heads
#14
Posted 04 May 2018 - 07:37 AM
LumpyVR4
-
- Active Members
-
- 351 posts
Advanced Member
- LocationSydney
It the input shaft and 1st for an evo III, that I'm installing in the box I'm building to go with my engine, seeing as putting 450 to 500 hp into a 300k gearbox probably isn't a good idea.
Edited by LumpyVR4, 06 May 2018 - 10:53 PM.
ECM Link, 399 MAF, 560cc injectors, 270 cams, TD05-20G @22psi, 3" dump, full 3" mandrel exhaust, intercooler, Fidanza alloy flywheel, 4 bolt LSD, EVO IV brakes, Strut braces, coil overs and sway bars.
#15
Posted 14 May 2018 - 10:10 AM
CAM280
-
- Active Members
-
- 131 posts
Advanced Member
- LocationAustralia Queensland
#16
Posted 14 May 2018 - 10:11 AM
CAM280
-
- Active Members
-
- 131 posts
Advanced Member
- LocationAustralia Queensland
#17
Posted 15 May 2018 - 01:32 AM
LumpyVR4
-
- Active Members
-
- 351 posts
Advanced Member
- LocationSydney
Tuning, or AFR peace of mind?
ECM Link, 399 MAF, 560cc injectors, 270 cams, TD05-20G @22psi, 3" dump, full 3" mandrel exhaust, intercooler, Fidanza alloy flywheel, 4 bolt LSD, EVO IV brakes, Strut braces, coil overs and sway bars.
#18
Posted 01 April 2019 - 06:24 AM
LumpyVR4
-
- Active Members
-
- 351 posts
Advanced Member
- LocationSydney
It's been a while since I've had anything to post here. Thankfully the drought is over. Time for some valve train porn.
Supertech +1mm nitrided intake and inconel exhaust, and 80lbs beehives with Ti retainers.
This lot, along with bronze guides, will soom be on their way to NZ to be installed in a CNCed 2g head at Horsepower Heads.
ECM Link, 399 MAF, 560cc injectors, 270 cams, TD05-20G @22psi, 3" dump, full 3" mandrel exhaust, intercooler, Fidanza alloy flywheel, 4 bolt LSD, EVO IV brakes, Strut braces, coil overs and sway bars.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
