18 replies to this topic

[omad]

So it's been some time since I did the mounts and with the box in/out so many times, they're pretty shagged.

Got sides and rear from Meek BUT the front is no longer available! And that's one that's really quite bad :/ I've poked around the net with very little success as well...

Anyone know where to get one, or maybe a few if it's this hard to locate now :/

[doommachine]

https://www.amazon.c...nt engine mount

 

:D:D:D

[Starion VR4 Derek]

Ahh forum member Lars use to do them, I just sent him a sms to see if he has any, I have them in my VR4 & RVR. Will update when I know more. 

 

Cheers

Derek

[omad]

Cheers guys. Found one looking through all those Amazon listings, hopefully the right one.

Know where to locate a knock sensor? All the ones on Amazon don't seem to ship to Australia

[Starion VR4 Derek]

Cheers guys. Found one looking through all those Amazon listings, hopefully the right one.

 

 

The forum member got back to me, PM me if you want his number, It is a good thing to support forum members & their endeavors. He is in Brisbane to so you will get it quicker if you buy from him.

Edited by Derek, 30 December 2017 - 02:45 AM.

[evo-gsr]

Lars is his name and Mad Polly is his business name if that helps

Edited by evo-gsr, 30 December 2017 - 03:41 AM.

[evo-gsr]

0433218228 is his number.

[Starion VR4 Derek]

0433218228 is his number.

 

Lars has sold all the stuff to Clint, but I am sure Lars will point you in the right direction.

Edited by Derek, 30 December 2017 - 04:03 AM.

[evo-gsr]

The forum member got back to me, PM me if you want his number, It is a good thing to support forum members & their endeavors. He is in Brisbane to so you will get it quicker if you buy from him.

Why not just put the contact details up for all to see then?
To keep with your theory "of supporting forum members and their endeavors"
Not being smart at all. Im just confused why a PM would be needed for the details.

[Starion VR4 Derek]

Why not just put the contact details up for all to see then?
To keep with your theory "of supporting forum members and their endeavors"
Not being smart at all. Im just confused why a PM would be needed for the details.

As a courtesy to the owner of the number, I don't have his permission to post it, guess it's a old school thing.

[evo-gsr]

No...I understand. Makes sense.

[Cranked]

Lars for sure. Good dude

[omad]

Is that for the 'oem' rubber mounts? I don't really want to go full poly. The ralliart rear one bumps the vibration up enough as it is...

[evo-gsr]

They are Polly.
He was trialling some with holes drilled for less vibrations if that is an option.
Best to contact whoever is running the show now and ask?

[Ian91]

I bought a set with the slots in to reduce vibration over the full solid mounts. They are actually very tame, I couldn’t notice more noise/ vibration than before I fitted them.

[hy_]

I bought a set with the slots in to reduce vibration over the full solid mounts. They are actually very tame, I couldn’t notice more noise/ vibration than before I fitted them.

 

Keen to grab a set of slotted mounts - Where did you get these from Ian?

 

Hesitant to pull the trigger on Mad Polly 92A solid mounts due to hardness for daily duties.

 

Have been trying to locate something in the 60A duro range but not finding much.  There is an Avid Racing 75A kit to suit 1G DSM on ebay, but the seller has advised these are not compatible with E39A (not so sure about that, research suggests everything is the same except for the front mount bracket)

[Ian91]

They were the mad Polly ones, he was doing solid and slotted when I bought.


Sent from my iPhone using Tapatalk Pro

[evo-gsr]

He has apparently sold the gig.....see discussion above.
Some other dude has taken over.

Edited by evo-gsr, 07 February 2018 - 03:41 AM.

[hy_]

Got in touch with Mad Polly via ebay message - Unfortunately no slotted option for E39A and only available in the 92A duro.