Jump to content

Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Photo

Manual Shifter Issue

- - - - -

  • Please log in to reply
12 replies to this topic

#1
fi5hGSR

fi5hGSR

    Member

  • Members
  • PipPip
  • 21 posts
  • LocationAustralia

Good Afternoon All,

 

I tried searching for answers but I just don't know how to describe it exactly - I have a CC GSR with a 4G63 conversion the H Pattern shifter is all pushed to the right... e.g. 1st is where 3rd is normally and 5th is way to the right alot more then usual. It goes into gear all good just really weird how everything is pushed to the right.

 

Anyone experience this before? Thanks in advance. 


Edited by fi5hGSR, 16 January 2018 - 05:34 AM.


#2
Ian91

Ian91

    Advanced Member

  • Active Members
  • PipPipPip
  • 1,651 posts
  • LocationPomona, Sunshine Coast, QLD
I had it in an Audi TT, there was a bushing in the shifter assembly that had disintegrated and made it that loose it was basically one position out lol.

The lancer shifter are bad for the bushings doing the same thing, check that first.

#3
evo-gsr

evo-gsr

    Advanced Member

  • Active Members
  • PipPipPip
  • 10,379 posts
  • LocationBuddhist Temple NSW
Usually once the bushings in shifter fuck out its sloppy....like a cock in a sock.
You will easily know if that is the problem.
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]

#4
Taz

Taz

    Advanced Member

  • Donating Members
  • PipPipPip
  • 456 posts
  • LocationBrisbane
Do you have the right length cables in there? If the side to side cable is too short or long that can cause your issue I'd imagine?

#5
evo-gsr

evo-gsr

    Advanced Member

  • Active Members
  • PipPipPip
  • 10,379 posts
  • LocationBuddhist Temple NSW
Not likely if it still selects all of the gears like he says it does ^
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]

#6
evo-gsr

evo-gsr

    Advanced Member

  • Active Members
  • PipPipPip
  • 10,379 posts
  • LocationBuddhist Temple NSW
Im going with one or more of the bushes being shagged like Ian suggests.
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]

#7
Taz

Taz

    Advanced Member

  • Donating Members
  • PipPipPip
  • 456 posts
  • LocationBrisbane

Or perhaps the linkage bracket on the gearbox bent?


  • ted likes this

#8
fi5hGSR

fi5hGSR

    Member

  • Members
  • PipPip
  • 21 posts
  • LocationAustralia

Thanks for all your input I will have a look at the bushings. 



#9
fi5hGSR

fi5hGSR

    Member

  • Members
  • PipPip
  • 21 posts
  • LocationAustralia

Ok the shifter bushings look to be ok - I did something i'm not too sure if it's normal play - on the gearbox itself where the cables hook up to - there is that shaft that goes straight into the gearbox - I can lift that up and down quite freely and this is the slack that in the shifter itself 



#10
Taz

Taz

    Advanced Member

  • Donating Members
  • PipPipPip
  • 456 posts
  • LocationBrisbane
How freely? It's meant to be spring loaded and return to centre. Not a tight spring but still tension none the less. If that's ok then possibly the spring in your shifter cradle is shagged or not in correctly?

#11
jack be nimble

jack be nimble

    master of none

  • Donating Members
  • PipPipPip
  • 8,301 posts
  • Locationperth sor. 20 mins from brians place
Bent gearstick
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.

#12
mymidlifecrisis

mymidlifecrisis

    Dean

  • Active Members
  • PipPipPip
  • 112 posts
  • LocationPerth

Spring that centres the gearstick has come unhooked.



#13
ted

ted

    Advanced Member

  • Active Members
  • PipPipPip
  • 1,670 posts
  • LocationWodonga VIC
Ive had the cable retaining brackets on the gearbox bent or different from other cars before and its done the same thing. Pushed it all the way over to one side.


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users