10 replies to this topic

[OLDIE]

Broke something in the driveline at the Oakey sprints on the weekend and the other drivers seem to think that it is either the diff or torque tube BUT I doubt it is the TT.

I could still drive it enough to get it onto the trailer accompanied with clunking noises and jerking so my money is on either the crown wheel or pinion.

 

The ratio is 3.9 and any help in locating one appreciated.

 

I still have the original open 3.5 small diff. The 3.9 is a big diff and am told that the lsd clutch pack won't fit in the small diff.

 

Have been told that some early TRITONS may have the parts I need any info on wether this is true and where to find one appreciated.

[evo-gsr]

Have a look in my for sale thread...might have what you need.

[OLDIE]

Have a look in my for sale thread...might have what you need.

 

 Have been thru your garage sale clean out thread  so have I missed seeing something ?? Can you help with a link or more specific details please??

Edited by OLDIE, 21 May 2018 - 08:46 PM.

[evo-gsr]

Rear diff pieces? Is that what your after?

[OLDIE]

Rear diff pieces? Is that what your after?

 

 I almost certainly will need a crown wheel and matching pinion to suit any ratio between 3.5 and 4.2  and am told that I have an 8 inch diff.

 

I will PM my contact details in case you need further info.

[evo-gsr]

I dont have any rear diff bits...which is why I asked the question about it being rear diff that your after.

[OLDIE]

I dont have any rear diff bits...which is why I asked the question about it being rear diff that your after.

 

STARIONS  are rwd

[OLDIE]

Diff is out and the pinion shaft has only 1/2 of the teeth left so the hunt is on for a replacement most likely a 4.222.

[OLDIE]

Have picked up a 4.222 MK Triton diff for a test fit of the internal parts and DANTRANS has done some preliminary checks and thinks that they "should fit" so fingers crossed as that will be good first hand info for other Starion enthusiasts/diehards.

[White Knight]

I hope that SHOULD becomes WILL matey. Best of luck!

[OLDIE]

DANTRANS has confirmed that the recoed diff is ready to be fitted