Going to 17x9.5 rims with 255 AO50 tyres...
Considering the rad support needs work I've decided to go with a tubular setup now with pin attachment points for the front bar (V8 Supercar style). Because racecar
Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
#1
Posted 11 June 2019 - 09:37 AM
ENGINR
-
- Active Members
-
- 5,061 posts
Wannabe Racer
- LocationMelbourne
Had a bit of a bingle with a tyrewall at Winton last Saturday. Fortunately the damage was limited to the radiator support and RHS guard - but still a good excuse to finally start implementing the big wheel and tyre upgrade.
Going to 17x9.5 rims with 255 AO50 tyres...
Considering the rad support needs work I've decided to go with a tubular setup now with pin attachment points for the front bar (V8 Supercar style). Because racecar
Going to 17x9.5 rims with 255 AO50 tyres...
Considering the rad support needs work I've decided to go with a tubular setup now with pin attachment points for the front bar (V8 Supercar style). Because racecar
- bj likes this
"I got an idea, an idea so smart my head would explode if I even began to know what I was talking about." - Peter Griffin
Back to top
#2
Posted 13 June 2019 - 10:02 AM
jack be nimble
-
- Donating Members
-
- 8,301 posts
master of none
- Locationperth sor. 20 mins from brians place
That sucks and is awesome at the same time.
- ENGINR likes this
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.
#3
Posted 13 June 2019 - 01:18 PM
VIN18M
-
- Active Members
-
- 1,209 posts
Advanced Member
- LocationSydney
#4
Posted 15 June 2019 - 04:48 AM
ENGINR
-
- Active Members
-
- 5,061 posts
Wannabe Racer
- LocationMelbourne
Yeah that's the second evo bonnet i've damaged on the car now... looking at having a carbon or fibreglass one made for it in case it happens again.
"I got an idea, an idea so smart my head would explode if I even began to know what I was talking about." - Peter Griffin
#5
Posted 18 June 2019 - 09:24 PM
SIVART
-
- Sponsors
-
- 4,973 posts
CE9A-0000001
- LocationMelbourne
sorry to see, you should make the guards in fiberglass too
#6
Posted 21 June 2019 - 11:31 PM
ENGINR
-
- Active Members
-
- 5,061 posts
Wannabe Racer
- LocationMelbourne
Yeah I'm looking into doing that. I'm going to make another set of sedan/coupe guards and then cut moulds off them.
Some great progress is being made on the tubular front end! Upper rad support is done.
Some great progress is being made on the tubular front end! Upper rad support is done.
Attached Thumbnails
- bj likes this
"I got an idea, an idea so smart my head would explode if I even began to know what I was talking about." - Peter Griffin
#7
Posted 29 June 2019 - 09:18 AM
ENGINR
-
- Active Members
-
- 5,061 posts
Wannabe Racer
- LocationMelbourne
Some more progress on the lower rad support.
Attached Thumbnails
- bj likes this
"I got an idea, an idea so smart my head would explode if I even began to know what I was talking about." - Peter Griffin
#8
Posted 29 June 2019 - 09:28 PM
VIN18M
-
- Active Members
-
- 1,209 posts
Advanced Member
- LocationSydney
#9
Posted 04 July 2019 - 11:05 PM
peasoup
-
- Active Members
-
- 743 posts
Advanced Member
- LocationMelbourne
#10
Posted 05 July 2019 - 05:17 AM
ENGINR
-
- Active Members
-
- 5,061 posts
Wannabe Racer
- LocationMelbourne
The new front end setup should remove weight as all the reinforcements and towing plates are being stripped.
Am thinking about having a crack at dabbling in a bit of carbon and fibreglass work - a new front bar will be on the cards.
Am thinking about having a crack at dabbling in a bit of carbon and fibreglass work - a new front bar will be on the cards.
- Evo-00x likes this
"I got an idea, an idea so smart my head would explode if I even began to know what I was talking about." - Peter Griffin
#11
Posted 27 July 2019 - 01:57 AM
Evo-00x
-
- Donating Members
-
- 8,151 posts
4G63T AWD CC COUPE
- LocationNewcastle
Its always better making a car lighter. The equal.and opposite effect is that it also makes your wallet lighter too lol.
AWD. 2 Litre. GTX3076R 0.82.
330kw atw @ 28psi 98 pump fuel.
372kw atw @ 28psi E85 Flexfuel.
EVOLVED AWD COUPE
WWW.EVOCOUPE.NET
330kw atw @ 28psi 98 pump fuel.
372kw atw @ 28psi E85 Flexfuel.
EVOLVED AWD COUPE
WWW.EVOCOUPE.NET
#12
Posted 29 July 2019 - 12:39 AM
ENGINR
-
- Active Members
-
- 5,061 posts
Wannabe Racer
- LocationMelbourne
Its always better making a car lighter. The equal.and opposite effect is that it also makes your wallet lighter too lol.
I hear you there mate!
I'm too far committed to this thing to start taking short-cuts with how I want to do things. This round of work will make the car easier to work on and just make the overall setup less cluttered. I'm also having the clearances cut into the front and rear guards to run the 255 tyres I've been planning to use for years.
"I got an idea, an idea so smart my head would explode if I even began to know what I was talking about." - Peter Griffin
#14
Posted 18 September 2020 - 09:23 PM
ENGINR
-
- Active Members
-
- 5,061 posts
Wannabe Racer
- LocationMelbourne
A bit of an update! Am making slow progress to piece it back together.
Made moulds for the sedoupe guards but they are not great, so having another go this weekend.
Plan is to make the actual parts in carbon for super light weight.
Also replacing the dash with a carbon skin. Weighs nothing!
Made moulds for the sedoupe guards but they are not great, so having another go this weekend.
Plan is to make the actual parts in carbon for super light weight.
Also replacing the dash with a carbon skin. Weighs nothing!
Attached Thumbnails
Edited by ENGINR, 18 September 2020 - 09:24 PM.
- JayRome likes this
"I got an idea, an idea so smart my head would explode if I even began to know what I was talking about." - Peter Griffin
#15
Posted 20 September 2020 - 04:00 AM
SIVART
-
- Sponsors
-
- 4,973 posts
CE9A-0000001
- LocationMelbourne
#16
Posted 02 October 2020 - 03:53 AM
EvoOne
-
- Active Members
-
- 559 posts
Advanced Member
- LocationSydney
#17
Posted 05 October 2020 - 01:05 AM
BYBY5L
-
- Active Members
-
- 2,047 posts
Member
- LocationMelbourne
Holy heck Shane, your cars looking awesome! Amazing to see how far this has come, I have to drop by one day and check it out
#18
Posted 10 October 2020 - 11:35 AM
ENGINR
-
- Active Members
-
- 5,061 posts
Wannabe Racer
- LocationMelbourne
Slowly chipping away. The redone hybrid coupe/evo sedan guards are pretty much done, I have blanked the indicator opening and am just spending a bit of time refining the surface before making the new fibreglass moulds.
Have had the 255/40/17 tyres fitted to the Enkei RPF1s and fitted them up for a final clearance check to the front guards and to have a play with the position of the front flares.
Will make the carbon guards in an unmodified shape and then trim them up to fit the flares and air diversion guides. This will give me flexibility to make more parts in the future and change the shape if I like. Will bolt the flares to the carbon guards. The plan is for the guards and flares to be in body colour.
Attached Thumbnails
Edited by ENGINR, 10 October 2020 - 11:59 AM.
- SIVART likes this
"I got an idea, an idea so smart my head would explode if I even began to know what I was talking about." - Peter Griffin
#19
Posted 10 October 2020 - 11:40 AM
ENGINR
-
- Active Members
-
- 5,061 posts
Wannabe Racer
- LocationMelbourne
Fitting the CDL3 and PDM keypad to the carbon dash in preparation for installation to the car. Have had to design and make an attachment strategy to hold the dash in place.
Attached Thumbnails
"I got an idea, an idea so smart my head would explode if I even began to know what I was talking about." - Peter Griffin
#20
Posted 10 October 2020 - 11:55 AM
ENGINR
-
- Active Members
-
- 5,061 posts
Wannabe Racer
- LocationMelbourne
Trying something different from a vent perspective on the bonnet. Needed to have the original vent openings welded up so the new vent setup can work....
Attached Thumbnails
"I got an idea, an idea so smart my head would explode if I even began to know what I was talking about." - Peter Griffin
4 user(s) are reading this topic
0 members, 4 guests, 0 anonymous users
