2 replies to this topic

[ULS33]

Hey guys,

 

I've read just about every thread I can find regarding 5 stud conversions here on 4Gtuner, but can't see anything that 100% confirms if you use FTO or GSR wheels bearings.

 

I have 2x sets of FTO front hubs

 

Do I use Evo/GSR REAR wheel bearings in conjunction with FTO front hubs for GSR rear trailing arms?

 

Do i use Evo/GSR FRONT wheel bearings in conjunction with FTO front hubs for GSR front knuckles?

 

Can someone confirm which bearings I need please?

 

Cheers 

Edited by ULS33, 22 September 2021 - 01:53 AM.

[evo-gsr]

I would say, you use the bearings that suit your rear trailing arm, if you currently are using Evo/GSR and are reusing those same trailing arms, then use whatever you have now?
Same for the front , I reckon.
The bearings need to match the knuckle/trailing arm.

[ULS33]

I would say, you use the bearings that suit your rear trailing arm, if you currently are using Evo/GSR and are reusing those same trailing arms, then use whatever you have now?
Same for the front , I reckon.
The bearings need to match the knuckle/trailing arm.

Thanks for the feedback mate *thumbs up* 

I might just have to bite the bullet and order the Evo/GSR bearings and find out the hard way I guess. 

So many reposts on here bout knuckles, hubs, brake calipers, trailing arms but very little info on wheel bearings to suit this type specific conversion. I'll post an update of my findings...hopefully helps someone one day