2643 replies to this topic

[DOUGMO]

switch panel and Motec PDM



rear wing 1810mm wide x 300mm deep, made from a foam mould then glassed over




fuel tank nearly done

[Evo-00x]

Nice. Very simple, effective, with minimal use of materials = weight savings!!!
#15 turn knob is awesome as you can control the rain lol

Edited by EVO-00X, 05 September 2012 - 09:08 AM.

[DOUGMO]

#25 is adjustable tail too!

They are circuit breakers, rain is rain lights, tail is brake lights, HFS is heated front screen
for the screen and rain I actually use them as an on off switch

[Missile]

Fk factory footwells... save more weight

http://www.rallytech...hi-evo-parts/64

[DOUGMO]

That would be sweet, WTA rules mean I must run the stock floor though unfortunatley

[DOUGMO]

some little tiny radial mounts for the rear

lighter than the stock 2 piston brembos, they will go on my new trailing arms when they arrive

[Velocity Racing]

Nice! Would they fit under 15"s?

[DOUGMO]

I reckon they would as they are tiny. I wouldnt use them on the front though, should be sweet on the back
with the endless big6 calipers though

[DOUGMO]

This should make up for the lack of side mirrors

[DOUGMO]

<sup>Also have a set of these from Racefab for the rear

A touch lighter than stock, and easily adjustable</sup>

[htgsr]

Hey, when you pulled the ABS out what proportioning valve an hard lines did you use? Reason I ask is I've just removed all the ABS from mine an thought any CC hard lines would fit but they don't so possibly looking at making new ones up unless I can avoid it.

[DOUGMO]

Hey, when you pulled the ABS out what proportioning valve an hard lines did you use? Reason I ask is I've just removed all the ABS from mine an thought any CC hard lines would fit but they don't so possibly looking at making new ones up unless I can avoid it.

I originally used cc lancer hard lines with a rs evo proportioning valve(incase it was different?), I did have to tweak them a touch but they did fit.This time around I ran all new lines, only cost me $80 for all new fittings and the tube to do it.
I also now only have one line to the back with a splitter

[htgsr]

I'm just going to make new lines now had a good look last night an it shouldn't be too hard, don't suppose you still have that RS pp valve do you? I've been looking on trade me but if I could find one over here happy days

Edited by htgsr, 11 September 2012 - 08:15 PM.

[jake]

George, Those rear arms just like the rest of the car is a work of art, Racefab by the looks have done a wonderful job on theses, are you getting custom trailing arms as well?

[DOUGMO]

I'm just going to make new lines now had a good look last night an it shouldn't be too hard, don't suppose you still have that RS pp valve do you? I've been looking on trade me but if I could find one over here happy days

Ill have a look mate, I think I should have it still somewhere, ill let you know

George, Those rear arms just like the rest of the car is a work of art, Racefab by the looks have done a wonderful job on theses, are you getting custom trailing arms as well?

Yes mate, I have some trailing arms on the way soon, tube with late model bolt on bearings/hubs, should save a few extra kgs a side

[jake]

Yes mate, I have some trailing arms on the way soon, tube with late model bolt on bearings/hubs, should save a few extra kgs a side

you'll have to post up some pics when they are done, Will they create a larger gap between the factory trailing arm and inside of rim?

[DOUGMO]

yes they will, approx 15mm extra, mind you with my 9" +12 rim setup I have plenty of room as it is anyway

[jake]

Nice, look forward to seeing them

[htgsr]

Sweet, ill definatly grab it if you do

[(2much)]

Pretty keen on trailing arms too George , group buy?